Changing Phone Settings; Customizing Rings And Message Indicators - Cisco 7931G User Manual

Changing Phone Settings

You can personalize your Cisco Unified IP Phone by adjusting the ring tone, volume, and other
settings.

Customizing Rings and Message Indicators

You can customize how your phone indicates an incoming call and a new voice mail message. You can
also adjust the ringer volume for your phone.
If you want to...
Change the ring tone per
line
Adjust the volume level for
the phone ringer
Change the way that the
voice message light on your
handset works
Change the way the audible
voice message indicator
sounds on your phone
Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0
Then...
1. Choose ) > Settings > User Preferences > Rings.
(
2. Choose a phone line or the default ring setting.
3. Choose a ring tone to play a sample of it.
4. Press Select and Save to set the ring tone, or press Cancel.
Press the Volume button while the handset is in the cradle and the
headset and speakerphone buttons are off. The new ringer volume is
saved automatically.
1. Log in to your Cisco Unified CM User Options web pages. (See
Accessing Your User Options Web Pages, page
2. Access your message indicator settings. (See
Settings on the Web, page
Note Typically, the default system policy is to indicate a new voice
message by displaying a steady light on the handset light strip.
1. Log in to your User Options web pages. (See
Options Web Pages, page
2. Access your message indicator settings. (See
Settings on the Web, page
Changing Phone Settings
Controlling Line
71.)
Accessing Your User
64.)
Controlling Line
71.)
64.)
55