To Remove The Electrical Wiring Box Cover - Daikin CTXA15A2V1BW Installer's Reference Manual

6 | Unit installation

6.2.5 To remove the electrical wiring box cover

Installer reference guide
26
a Connector
b Wire clamp
c Screw cover
d Long flat plate wrapped in a cloth
6 Push the front grille up and then towards the mounting plate to remove the
front grille from the 3 hooks.
a Hook
Prerequisite: If working space is limited.
7 Insert a flat screwdriver next to the hooks.
8 Pull the front grille up using the flat screwdriver and push towards the
mounting plate.
a Hook
b Flat screwdriver
Prerequisite: Remove the front grille.
1 Remove 1 screw from the electrical wiring box.
2 Open the electrical wiring box cover by pulling it to the front.
3 Remove the electrical wiring box cover from the 2 rear hooks.
a
b
c
d
a
a
b
CTXA15+FTXA25~50(A)(B)2V1B(W)(S)(T)(B)
Daikin room air conditioner
4P518023-3K – 2022.05