Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Wisenet ANE-L7012R
Summary of Contents for Wisenet ANE-L7012R
- Page 1 NETWORK CAMERA User Manual ANE-L6012R ANE-L7012R...
- Page 2 Network Camera User Manual Copyright ©2022 Co., Ltd. All rights reserved. Hanwha Techwin Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved.
- Page 3 16. This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” or “PS2” electric shock to persons. and rated from PoE(48V), 0.16A. (ANE-L7012R) 17. This product is intended to be supplied by isolation power.
- Page 4 ANE-L6012R as defined in UL60950-1 or PS2 as defined in UL62368-1. ANE-L7012R Unit is intended for installation in a Network Environment 0 as defined in IEC TR 62102. As such, associated Ethernet wiring shall be limited to inside the building.
-
Page 5: Table Of Contents
Important Safety Instructions Connecting to the Camera Recommended PC Specifications Password setting Recommended Micro SD/SDHC/SDXC Login Memory Card Specifications Camera Web Viewer Setup NAS recommended specs (ANE-L7012R model only) What’s Included At a Glance APPENDIX Troubleshooting INSTALLATION & CONNECTION Installation... -
Page 6: Recommended Pc Specifications
RECOMMENDED PC SPECIFICATIONS NAS RECOMMENDED SPECS (ANE-L7012R MODEL ONLY) ~ CPU : Intel(R) Core(TM) i7 3.4 GHz or higher ~ For this camera, you are recommended to use a NAS with the following manufacturer’s specs. ~ RAM : 8G or higher... -
Page 7: What's Included
WHAT’S INCLUDED Optional Accessories for Installation For your easier installation, you can purchase appropriate optional accessories available. Please check if your camera and accessories are all included in the product package. (As for each sales country, accessories are not the same.) Appearance Item Name Quantity... -
Page 8: At A Glance
overview AT A GLANCE Components Appearance Item Description Item Description The button restores all camera settings to the factory default. Head A part that contains the lens and the internal body. Press and hold for about 5 seconds to reboot the system. If you reset the camera, the network settings will be adjusted so that DHCP can be Reset Button Middle Cover... -
Page 9: Installation & Connection
installation & connection INSTALLATION Installation 1. Consider the direction to be monitored, attach the template, and drill holes by following the template. This camera is waterproof and in compliance with the IP67 spec, but the jack connected to the external cable is not. You are Set the <... - Page 10 installation & connection 8. Put the middle cover back and rotate it clockwise until it is firmly in How to connect the RJ45 waterproof cable to a LAN cable place. Align the insert mark on the camera body and the interlock mark on the middle 1.
- Page 11 Adjusting the monitoring direction for the camera Outdoor installation When you install it outside of the building, please waterproof it with waterproof butyl rubber tape (can be purchased in stores) so that water does not leak from the gap of the cable connected to the outside. 1.
-
Page 12: Inserting/Removing A Micro Sd Memory Card
installation & connection INSERTING/REMOVING A MICRO SD MEMORY CARD Removing a Micro SD Memory Card Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory Disconnect the power cable from the camera before inserting the Micro SD memory card. card from the slot. -
Page 13: Powering And Networking
POWERING AND NETWORKING Connect the PoE device and camera’s PoE connectors. PoE Router Connect to a PoE (Power over Ethernet) enabled router’s PoE connector. Use PoE (Power over Ethernet) that is compliant with the IEEE802.3af protocols. If you want to connect an external device, you must turn off the external device before proceeding. Network Cable Specification Item Contents... -
Page 14: Network Connection And Setup
network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN INTERNET DSL/Cable Modem 1. -
Page 15: Using Device Manager
USING DEVICE MANAGER If using a Broadband Router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. Device manager program can be downloaded from <Technical Support>-<Online Tool> menu at Hanwha Techwin website ex) 192.168.1.2~254, 192.168.0.2~254, (http://www.hanwha-security.com). -
Page 16: Manually Registering Camera
network connection and setup Configuring Dynamic IP AUTOMATICALLY CONFIGURING IP Receive IP address from DHCP 1. Click the camera from the list that you want to automatically • Example of the Dynamic IP environment configure the IP. ANE-L6012R - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server 2. -
Page 17: Port Range Forward (Port Mapping) Setup
Port forwarding can be done without additional router setup if the router supports the UPnP (Universal Plug and Play) function. For more information, refer to the user manual of the applicable router. After connecting the network camera, select the checkbox from the menu <Quick connect> in <Wisenet DDNS> in “Settings -> Network -> DDNS”. -
Page 18: Connecting To The Camera From A Shared Local Pc
2. From the remote PC, launch the Internet browser and type the DDNS URL address of the camera, or the IP address of the Broadband Router in the address bar. ex) http://ddns.hanwha-security.com/ID To use Wisenet DDNS, sign up at the Wisenet DDNS homepage (http://ddns.hanwha-security.com) and register the product at [My DDNS]>[Register Product]. 18_ network connection and setup... -
Page 19: Connecting To The Camera
To register your device to the <DDNS> server, visit http://ddns.hanwha-security.com and register your device 1. Launch the Internet browser. first, and then set the Web Viewer’s <Network> - <DDNS> to <Wisenet DDNS>, as well as providing <Product ID> that had been used for DDNS registration. -
Page 20: Password Setting
web viewer PASSWORD SETTING CAMERA WEB VIEWER SETUP When you access the product for the first time, you must register the 1. Click the [Setup ( )] icon. login password. 2. The Settings window appears. 3. You can configure settings for the camera’s basic information, video, network, event, analysis, and system over the network. -
Page 21: Troubleshooting
appendix TROUBLESHOOTING PROBLEM SOLUTION PROBLEM SOLUTION • On the authentication popup window prompted when initially accessing https, click "View • Verify the settings in the following sequence: <Motion detection> of <Analytics> is Authentication Certificate" and select the "Always trust when connecting to the designated set to <Enable>, but no notification A. - Page 22 Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the ANE-L7012R and is the answer not in the manual?
Questions and answers