Makita GHU04 Instruction Manual page 11

8. Align the protrusions on the shear blades vertically
at the same position.
Fig.16
► 1 . Protrusion
9.
Insert the screw removed in step 5 into the holes
on the blade cover and the shear blades to temporarily
fix the shear blades, and then attach the felt pad to the
shear blades.
1
Fig.17
► 1 . Screw 2. Felt pad 3. Hole
1
2
3
10. Insert the protrusion on the shear blades to the
hole on the rod, then align the position of the felt pad
with the holes on the tool. Attach two new sleeves.
1
3
4
Fig.18
► 1 . Felt pad 2. Protrusion 3. Hole 4. Sleeve
NOTICE:
Apply a small amount of grease to the
inner periphery of the hole of the rod.
NOTICE:
Be careful not to lose the sleeves.
11. Align the holes on the sleeves and shear blades
with the holes on the tool, and then tighten two screws
to temporarily fix the shear blades.
1
Fig.19
► 1 . Screw
11 ENGLISH
2