Page 1
LM-200 MECHANICAL LUBE METER Owner’s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 “ A G r e a t P l a i n s Ve n t u r e s S u b s i d i a r y ”...
To the owner… GENERAL INFORMATION Congratulations on receiving your GPI Mechanical Lube Meter. We at GPI are The purpose of this manual is to assist pleased to provide you with a Lube Meter you in operating and maintaining your designed to give you maximum reliability GPI Mechanical Lube Meter.
The LM-200 meter is equipped with an are being dispensed. Refer to the Repair internal strainer. The strainer should be Section for calibration instructions.
NOTE: It may be necessary to place a NOTE: Your GPI dealer can supply a screwdriver under the edge of the calibration container designed for nutator and gently pry free.
4. Broken nutator disc pin Disassemble meter and install new or defective nutator nutator assembly. assembly 5. Missing or jammed Contact GPI Customer Service. counter bevel gear B. METER COUNTER 1. Clogged strainer Clean strainer. DOESN’T OPER- ATE (Little or no flow) C.
It may be possible to diagnose the trouble and identify needed parts in a tele- For warranty consideration, parts, or other phone call or letter. GPI can also inform you service information, contact your local of any special handling requirements you distributor.
Page 8
To make a claim against this warranty, contact the GPI Customer Service Department at 316-686-7361 or 800-835-0113. Or by mail at: Great Plains Industries, Inc.