Table of Contents
Advertisement
• Avoid installing the product on a shelf or a slanted surface.
If not, the product could fall, causing personal injuries or
defects on the phone.
• Avoid installing the product close to other electronic prod-
ucts such as TV, audio instruments, etc. It may cause some
noises due to electromagnetic interference. Properly install
the base away from such products.
• Avoid installing or using the product near kitchen utensils
such as cooking table, humidifier, rice-cooker, etc., or in loca-
tions exposed to rain and wind or such places as bathroom
where water might be splashed. Electric shock, fire, deforma-
tion or product defects could be caused.
WARNING:
• Remove dust from the power plug pin and insert the power
plug tightly into power receptacle. If not, fire or electric shock
could be caused.
• Do not use a damaged or loosened plug, and do not modify or
damage the power cord. Fire or electric shock could be caused.
• Do not connect a multiple number of cords into a single
power connector. Fire or electric shock could be caused.
• Do not touch the power plug with wet hands and grasp the
power supply plug when unplugging the power cord. Fire or
electric shock could be caused.
• Do not cover the power cord and the adaptor with a pad,
and do not place them near heating instruments. Do not to
let children or pets bite the phone or the power cable. Fire or
electric shock could be caused.
• Use the adaptor that was included in the product package
(See the product specification). Check the rated voltage at
home. Using other voltages may cause a fire.
• Ensure that the external cords of the phone are disconnected
before it is moved from the installation site. If not, fire or elec-
tric shock could be caused.
• Do not bend the power cord, and do not place a heavy instru-
ment on the cord. Fire or electric shock could be caused.
INFORMATION
Power Supply
29
Advertisement
Table of Contents
