Lambrecht Ser[LOG] Operator's Manual page 46

The designation in the "Channel" column designates the channel number and the connection to the
Ser[LOG] or AnDiMod.
S03 - 1 A01 = Kanal S03 belegt durch Analogeingang Klemme 1 von AnDiMod-Modul mit Adresse 1
DA/DB Statuseingang; A01-A12 Analogeingang je AnDiMod-Modul; D01-D03 Digitaleingang je AnDiMod-Modul
Adresse des angeschlossenen AnDiMod-Moduls 1-3
Kanalnummerierung S01 – S60
By clicking on a sensor selection field of the respective channel (in the example "Channel S18") the
selection of the already defined sensors is displayed.
A list of predefined sensors can be found in chapter 14.
Selecting a sensor opens the "Settings Details" window, which will prompt you to enter further parame-
ters if necessary. It can also be called later by button
Tip: A channel can be deleted by double-clicking on its position (column channel).
All sensors have the same feature in common, i. e. the possibility to change the sensor abbreviation.
This abbreviation is the text displayed on the display of the Ser[LOG] which is later used in the advanced
LAMBRECHT meteo GmbH
. The structure of the window is context related.
software. It is also possible to enter a linear
correction for each sensor according to the
formula Y=A*X+B, where X is the measured
value and Y is the corrected value. The Y-
value is processed further in each case.
Ser[LOG] Manual Page 46 of 129