Oasis SNV300 Series Instruction Manual

Oasis SNV300 Series Instruction Manual

Non return valves

Advertisement

SNV300 Series
Non Return Valves
Instruction Manual
Oasis Engineering Ltd
129 Birch Avenue, Tauranga, New Zealand.
T: +64 7 928 3808 F: +64 7 928 3809
E: info@oasisNGV.com
W: www.OasisNGV.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SNV300 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Oasis SNV300 Series

  • Page 1 SNV300 Series Non Return Valves Instruction Manual Oasis Engineering Ltd 129 Birch Avenue, Tauranga, New Zealand. T: +64 7 928 3808 F: +64 7 928 3809 E: info@oasisNGV.com W: www.OasisNGV.com...
  • Page 2 Safety Warning! Oasis recommends considering the use of the following PPE along with any other site specific health and safety requirements: Ensure the system is drained & isolated before any installation or servicing work is carried out. Tools Required TIG Welder C Spanner SNV-INS-01 2822 ©...
  • Page 3 Fully weld join. We reserve the right to modify product specifications without prior notice. We reserve the right to modify product specifications without prior notice. SNV-INS-01 2822 © Oasis Engineering Limited SNV-INS-01 2822 © Oasis Engineering Limited...
  • Page 4 7. Connect the two sides together. 8. Installation complete, check for leaks on first use. Look for fluid leakage on first use. Tighten with a suitable C-spanner. SNV-INS-01 2822 © Oasis Engineering Limited We reserve the right to modify product specifications without prior notice.
  • Page 5 Servicing Service Kit Parts Spring O-ring Main Seal O-ring The Complete Oasis Seal Kit must be used Tools Required Cleaner Food Grade Grease (Warm Soapy Water or (Omage 58 or Similar) Similar) C Spanner We reserve the right to modify product specifications without prior notice.
  • Page 6 Servicing Disassembly Exploded View 1. Uncouple valve. 2. Remove poppet. 3. Disassemble poppet and discard spring and O-ring. SNV-INS-01 2822 © Oasis Engineering Limited We reserve the right to modify product specifications without prior notice.
  • Page 7 6. Clean components. Visually check components for damage. We reserve the right to modify product specifications without prior notice. We reserve the right to modify product specifications without prior notice. SNV-INS-01 2822 © Oasis Engineering Limited SNV-INS-01 2822 © Oasis Engineering Limited...
  • Page 8 8. Fit new seal. 9. Assemble poppet. 11. Connect valve. 10. Install poppet. 12. Complete. Tighten with a suitable Check for leaks on first C-spanner. use. SNV-INS-01 2822 © Oasis Engineering Limited We reserve the right to modify product specifications without prior notice.

Table of Contents