Aam - ICP DAS USA GPS-721 User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

2.24 ~AAM

Description:
The command is used to read the transmission protocol of the
module, which can be either DCON or GPS protocols. In GPS
mode, no message can be send via the RS-485 port.
Syntax:
~AAM[CHKSUM](CR)
~ Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
M Command to read the transmission mode of
RS-232 port
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter for a valid command
? Delimiter for an invalid command
AA Address of the module in hexadecimal format (00
to FF)
S Transmission modes Supported by the module
0: DCON
3: DCON\GPS mode
C Code to indicate the mode
0: DCON
1: GPS
!AASC[CHKSUM](CR)
76/98 GPS-721 User Manual V2.0, Oct. 2010
GPS-721 User Manual