Aad - ICP DAS USA GPS-721 User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

2.14 $AAD

Description:
The $AAD command is used to update the current date of the
module. Command #AA4 is use to read the current date. It
takes 2 seconds to read the date.
Syntax:
$AAD[CHKSUM](CR)
$ Delimiter character
AA Address of the module in hexadecimal format (00
to FF)
D Command to update the current date
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter for a valid command.
? Delimiter for an invalid command.
AA Address of the module in hexadecimal format (00
to FF)
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
!AA[CHKSUM](CR)
58/98 GPS-721 User Manual V2.0, Oct. 2010
GPS-721 User Manual