Table of Contents
Advertisement
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
1.6 Mounting
The GPS-721 can be mounted on a DIN rail, a wall or it can be
piggybacked to other modules using the bottom of the chassis.
DIN-Rail Mounting
The GPS-721 has simple rail clips for reliable mounting on a
standard 35 mm DIN rail.
There are three new DIN rail models available. Each is made of
stainless steel, which is stronger than those made of aluminum.
There is a screw at one end, and a ring terminal is included so
that it can be easily connected to the earth ground. The three
new DIN rail models are as follows:
Note: It is recommended that a 16 – 14 AWG wire is used to
connect the DIN rail to the earth ground.
18/98 GPS-721 User Manual V2.0, Oct. 2010
GPS-721 User Manual
Advertisement
Table of Contents
