WeTech DP1-681USB User Manual

USER MANUAL

DP1-681USB

Article number: 600162

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your desk programming station (DP). Before using your DP, read

this manual and all warning instructions with care in order to avoid possible danger.

This product is suitable for charging and programming SEPURA STP8000 and STP9000

radios with an original rechargeable battery.

Made in Germany

Table of Contents

Need help?

Do you have a question about the DP1-681USB and is the answer not in the manual?

Page 1 DP1-681USB Article number: 600162 Thank you for purchasing a WeTech® product. This user manual contains important safety and operating instructions for your desk programming station (DP). Before using your DP, read this manual and all warning instructions with care in order to avoid possible danger.
Page 2 The contacts of the product should be cleaned at regular intervals with a dry cloth. Do not use water or other liquids. Scope of delivery The following items are included in the scope of delivery: 1x DP1-681USB 1x USB A to USB B cable 1x Power supply for 230V Start of the sy stem Place the DP at a suitable place.
Page 3 Red LED Quick charging active. Battery capacity under Quick charging inactive. Battery capacity over Red LED Electricity supply is given Power Power connection for delivered power cable connection USB B socket Data interface to PC Schematic drawing DP1-681USB...
Page 4 The correct disposal of this product supports environmental protection and prevents possible damage to the environment and human health. Contact This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax: +49 6621 9240-44 DE-36251 Bad Hersfeld website: www.wetech.de e-mail: info@wetech.de...

600162