WeTech DP669USB User Manual

USER MANUAL

DP669USB

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your desk programming station (DP). Before using your DP, read

this manual and all warning instructions with care in order to avoid possible danger.

This product is suitable for charging and programming MOTOROLA MTP3250 and MTP6750

radios with a MOTOROLA NNTN8023 rechargeable batteries.

Made in Germany

Table of Contents

Need help?

Do you have a question about the DP669USB and is the answer not in the manual?

Page 1 USER MANUAL DP669USB Thank you for purchasing a WeTech® product. This user manual contains important safety and operating instructions for your desk programming station (DP). Before using your DP, read this manual and all warning instructions with care in order to avoid possible danger.
Page 2 The ventilation slots must not be covered. Scope of deliver y The following items are included in the scope of delivery: 1x DP669USB 1x Power cable 1x USB cable 1x User manual Start of the s ys tem Place the DP at a suitable place.
Page 3 Electricity supply is given USB-B Connection to PC USB-A Programming port for MRT over USB-cable EURO-Buchse Power supply Main switch For power supply 12V / 1A Power supply for MRT I / J Not in use Schematic drawing similar DP669USB...
Page 4 The correct disposal of this product supports environmental protection and prevents possible damage to the environment and human health. Contact This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax: +49 6621 9240-44 DE-36251 Bad Hersfeld website: www.wetech.de e-mail: info@wetech.de...