Instruction for use Multiplex
GB
Intended use
Multiplex is a combined inlet, drain and overflow fitting with optional 5 cm water
level increase for bathtubs with a 52-mm drain hole.
It is exclusively designed for household wastewater. Introducing other liquids such
as cleaning agents that could damage sanitary equipment, drain components and
pipe materials, especially those with a pH value of less than 4, is not permitted.
Installation must only be performed by specialist companies in compliance with local
building code.
Drainage capacity
Overflow capacity
This instruction manual should be given to the building owner after assembly.
A
Model
6171.10
6171.11
6171.12
0.87 l/s
0.55 l/s or 0.63 l/s
Art.-No. Product description
Multiplex inlet and overflow,
724 566
with 5 cm water level increase,
with rotatable collar, valve cone, odour trap,
drainage elbow 45°,
Bowden wire 560 mm long,
chrome-plated version
724 573
see above,
stainless steel version
Multiplex inlet and overflow,
733 582
with 5 cm water level increase,
with rotatable collar, valve cone, odour trap,
drainage elbow 45°,
Bowden wire 725 mm long,
chrome-plated version
733 599
Multiplex inlet and overflow,
with 5 cm water level increase,
with rotatable collar, valve cone, odour trap,
drainage elbow 45°,
Bowden wire 1070 mm long,
chrome-plated version
24