Advertisement
1. Position Lift under appropriate lift point, centering load on lift platform.
2. Locate and pump the lift pedal until the lift platform comes into contact with an appropriate lift point.
3. After centering the load, slowly and carefully raise the lift platform by pumping the lift foot pedal.
4. Engage the Anti-Slide Stops by turning the knobs, extending it until the rear casters don't touch the ground.
5. Continue pumping until the load has reached desired height. Secure the load using appropriate tie down means.
Four tie down loops have been provided on the frame of the Lift. Make sure that the height locking mechanism is
fully engaged before working on or around the loaded Lift.
WARNING: Clear all tools and personnel before lowering load.
6. To lower, disengage height locking lever and depress release pedal. It may be necessary to slightly raise the lift
platform before disengaging the height locking lever.
Oil Filler
Plug
Release Pedal
OPERATING INSTRUCTIONS
Handle
Lift Pedal
Hydraulic Unit
Sleeve
Swivel Casters
KNOW YOUR LIFT
To Engage Locking Mechanism, press
Height Locking Lever forward against
Lift Frame. To disengage locking
mechanism, pull Lever back against
Hydraulic Unit.
Height
Locking/Unlocking
Lever
Anti-Slide Stops
6
Lift Saddle
Front Wheel
Advertisement
