Advertisement
3. Install Pump Pedal.
Pump pedal (29)
Bolt M8x12 (32)
4. Install Handle.
Handle pin (20)
Do not use if cracked, broken, bent or otherwise damaged parts are noted or if the lift is suspected to have been
subjected to a shock load. A shock load is caused by rapidly opening and closing the release valve while the lift is
loaded. Such operation may result in a hydraulic overload which may disable the hydraulic unit. Owner and operators
of this device shall be aware that no serviceable or replaceable parts are available for this device other than those
parts listed on page 6. Any lift that appears to be damaged in any way, is worn or operates abnormally shall be
removed from service immediately until such time as repairs can be made. Do not attempt to weld, rivet or otherwise
repair this device. DO NOT modify or alter this device. It is recommended that an annual inspection be done to this
device by qualified persons and that missing or damaged labels, warning safety decals be replaced with ones that
are factory authorized.
ASSEMBLY INSTRUCTIONS
Hydraulic ram
T-handle (25)
Load frame (19)
INSPECT BEFORE EACH USE
5
Advertisement
