Pro-Lift T-2300A Owner's Manual page 4

1. Install Hydraulic Ram
Attach hydraulic ram to the ram platform with bolts (21) and washers (22) (24).
Hydraulic ram
2. Attach Hydraulic Ram & Lock Bar
A. Remove cotter pin and lock pin (27) from ram. Raise load frame (19) by hand and align the head of the hydraulic
ram with the tab holes in the low center of the load frame. Replace lock pin (27) and secure with safely clasp
(23).
Load frame (19)
B. To install lock bar, align lock bar (16) into lock pawls (2) on both sides and secure using washers (17) and nuts
(18).
Lock washer (17)
ASSEMBLY INSTRUCTIONS
Bolt (21)
Lock washer (22)
Washer (24)
Ram platform
Lock pawl (2)
M8 nut (18)
4
Lock pin (27)
Safety clasp (23)
Hydraulic ram
Lock bar (16)
Lock pawl (2)