Download Print this page

Intended Use; Specifications - Pro-Lift T-2300A Owner's Manual

Utility/atv lift

Advertisement

SAVE THESE INSTRUCTIONS
For your safety please read, understand and follow the information contained within before use. The owner and operator
shall have an understanding of this product and safe operating procedures before attempting to use. Instructions and
safety information shall be conveyed in the operators native language before use is authorized. Make certain that
the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any
doubt exists as to the safe and proper use of this device as outlined in this factory authorized manual, remove the lift
from service until safe and proper use is clearly understood.

INTENDED USE

This lift is specifically designed to lift and support up to rated capacity loads consisting of a single Motorcycle, ATV,
Snowmobile, Water Craft or Riding Lawn Mower whose frames are compatible with the lifting members of the lift.
Incompatibility is evident when the loaded motorcycle, ATV, etc wobbles, feels unstable, and/or does not securely on
the lift's padded lift arms. Tying down incompatible loads will not make the loads secure and may cause unexpected
loss of load resulting in personal injury and/or property damage. These lifts are NOT suitable for lifting, leveling and/or
positioning cars, trucks, SUV's or conveyances other than those specifically listed and approved above. These lifts
are NOT suitable for lifting, leveling and/or positioning houses, construc-tion trailers and dwellings in general. This
product does not contain independent lifting devices, but is designed to be permanently assembled. Hydraulic unit
is not to be used independently of the motorcycle lift.
WARNING
Study, understand and follow all printed materials provided with and on this device. Do not exceed rated capacity.
Ensure load is compatible with lift's lifting pad. Center load on lift pads. After lifting load to desired height, ensure
lift arm locking mechanism is engaged. Secure load to lift using apropriate straps. Engage Anti-slide Stops before
working on or around loaded Lift. Move loaded lift only over smooth, level, seam-less surfaces. Before moving, ensure
load has been lowered completely. Use only on hard, level surfaces capable of sustaining rated capacity loads. Lift
only on areas of the load as specified by it's manufacturer. Do not alter this product in any way. Do not use for any
purpose other than that for which this device is intended. Failure to heed these messages may result in personal
injury and/or property damage.

SPECIFICATIONS:

Rated Capacity: 680 kg
Height Lowered: 118 mm
Height Raised: 368 mm
Net Weight: 26.8 kg
2

Advertisement

loading

This manual is also suitable for:

T-2300a-1T-2300a-2T-2300a-3T-2300a-4T-2300a-5T-2300a-6