Checking The Last Time Adjustment Result; Using The Watch In A Medical Facility Or Aircraft - Casio 5652 Operation Manual

11.
Rotate the crown to change the month.
12.
Press (C).
The mode hand will move slightly,
indicating that the day setting operation is
enabled.
Changing the day setting will cause the
●
mode hand to rotate repeatedly.
Hand and Day Indicator Movement
l
13.
Rotate the crown to change the day.
30
Day
14.
On a time signal at the top of a minute,
push the crown back in.
Configuring the Summer Time Setting
●
(Home City)
If you are in an area that observes summer
time, you can also configure a summer time
setting.
Note
The initial factory default summer time
●
setting for all cities is [AT (AUTO)]. In
many cases, the [AT (AUTO)] setting
lets you use the watch without
switching between summer time and
standard time.
When performing a manual operation
●
to select a time zone for which there is
no city name displayed, use [STD] or
[DST] for the summer time setting.
1.
Pull out the crown to the second click.
The second hand will point to the currently
selected time zone.
The mode hand will point to the summer
●
time setting for the currently selected
Home City.
Watch Operation Guide 5652
2.
Hold down (A) for at least one second.
Each time you hold down (A) for at least
one second, the summer time setting will
cycle to the next available option.
[AT (AUTO)]
●
The watch switches between standard
time and summer time automatically.
[STD]
●
The watch always indicates standard
time.
[DST]
●
The watch always indicates summer
time.
3.
Push the crown back in to its normal
position.
Checking the Last Time
Adjustment Result
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (B).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
Note
Even if there was a successful time
●
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time and/or date setting
manually.
Summer time setting
30
Second hand
30
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (B).
The second hand will indicate the last
receive result for nine or ten seconds.
Second hand
30
3.
Within 10 seconds after pressing (B)
above, pull out the crown to the first click.
If more than 10 seconds elapse before
●
you pull out the crown after you perform
the operation in step 2, the second hand
will return to indicating seconds. If this
happens, perform step 2 again.
4.
Rotate the crown to disable auto time
adjustment.
[Y(YES)]: Auto time adjustment enabled.
[N(NO)]: Auto time adjustment disabled.
30
5.
Push the crown back in.
Note
If the watch is paired with a phone,
●
OCEANUS Connected can be used to
disable auto time adjustment.
Using OCEANUS Connected to
l
Disable Auto Time Adjustment
Crown
8