Installing An Oxygen Gvx1 Card; Installing The Oxygen Gvx1 Card - HP P Class 450/500/550/600/650/700/750 Supplementary Manual

Oxygen GVX1

Installing an Oxygen GVX1 Card

Installing an Oxygen GVX1 Card
This section contains the following subsections:

• Installing the Oxygen GVX1 Card

• Updating the Oxygen GVX1 Driver
• Configuring the Oxygen GVX1 Driver
• Troubleshooting
Installing the Oxygen GVX1 Card
1. Before installing your graphics card, disconnect all power, peripheral, and
telecommunications cables from the Personal Workstation.
WARNING To avoid electrical shock, make sure that you unplug the power cable
from the wall outlet and the Personal Workstation before proceeding.
2. To remove the Personal Workstation's cover, refer to the User's Guide that came with
your Personal Workstation. Alternatively, you can print out a copy from any of the
following sources:
• Your hard drive's preloaded files
• The tools and support CD
• The support website at: //www.hp.com/go/visualizesupport
3. Use a static-grounding strap, attaching it to the bare metal chassis of your Personal
Workstation before handling the Oxygen GVX1 Card.
4. Place the Personal Workstation on its side on a flat work surface, such as a table top.
5. Ensure that all cables are correctly routed and flat against the system so that they do
not obstruct the Oxygen GVX1 Card.
14 Chapter 1