Installing, Updating And Configuring The Cards; Installing An Elsa Graphics Card - HP P Class 450/500/550/600/650/700/750 Supplementary Manual

Installing, Updating and Configuring the Cards
This section contains the following subsections:
• Installing an ELSA graphics gard
• Updating the ELSA graphics driver
• Configuring the ELSA graphics ddriver
• Troubleshooting

Installing an ELSA Graphics Card

1. Before installing your graphics card, disconnect all power, peripheral, and
telecommunications cables from the Personal Workstation.
WARNING To avoid electrical shock, make sure that you unplug the power cable
from the wall outlet and the Workstation before proceeding.
2. To remove the Personal Workstation's cover, refer to the User's Guide that came with
your Personal Workstation. Alternatively, you can print out a copy from any of the
following sources:
• Your hard drive's preloaded files
• The tools and support CD
• The support website at http://www.hp.com/go/visualizesupport
3. Use a static-grounding strap, attaching it to the bare metal chassis of your Personal
Workstation before handling the ELSA graphics card.
4. Place the Workstation on its side on a flat work surface, such as a table top.
5. Ensure that all cables are correctly routed and flat against the system so that they do
not obstruct the ELSA graphics card.
Chapter 1
ELSA SYNERGY II and GLoria II Graphics Cards
Installing, Updating and Configuring the Cards
15