Important Safety Instructions - HP P Class 450/500/550/600/650/700/750 Supplementary Manual

Important Safety Instructions

WARNING If you have any doubt that you can lift the HP V
Workstation or display safely, do not try to move it without help.
For your safety, always connect the equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug, such
as the one provided with this equipment, or one in compliance with
your national regulations. This HP V
disconnected from the power by removing the power cord from the
power outlet. This means the Personal Workstation must be located
close to a power outlet that is easily accessible.
For your
Workstation's cover without first removing the power cord from the
power outlet, and any connection to the telecommunications
network. Always replace the cover on the Personal Workstation
before switching it on. Failure to follow these instructions results in
the risk of electrical and/or mechanical hazards during the
operation.
To avoid electric shocks, do not open the power supply. There are no
user-serviceable parts inside.
This HP V
Do not attempt to make any adjustment to the laser units.
Before handling the Oxygen GVX1 card, first wait until the card has
cooled down completely before touching it. The card can become
very hot during use.
CAUTION Static electricity can damage electronic components. Therefore, anytime you
handle an accessory such as the Oxygen GVX1 card, you should use an
electrostatic grounding strap. You should turn all equipment OFF. Do not let
your clothes touch the accessory. To equalize the static electricity, rest the
antistatic bag on top of the Personal Workstation while you are removing the
accessory from the bag. You should also handle the accessory as little as
possible and with care.
Chapter 1
safety, never remove
Personal Workstation is a Class 1 laser product.
ISUALIZE
ISUALIZE
Personal Workstation is
ISUALIZE
the HP V
ISUALIZE
Oxygen GVX1
Introduction
Personal
Personal
13