Table of Contents
Advertisement
Comware Software, Version 5.20, Release 2209, Standard
Copyright (c) 2010-2012 Hewlett-Packard Development Company,
L.P.
HP A-MSR30-40 uptime is 1 week, 0 day, 7 hours, 21 minutes
If the router software is out-of-date, update it:
To install new software, see HP MSR Software Release Notes.
Installing the HP MSR SBM
Installation precautions
Static electricity can severely damage the electronic components on the
module. When handling and installing the module, follow these
procedures to avoid damage from static electricity:
Handle the module by its bulkhead or edges and avoid touching the
components and the circuitry on the board.
When installing the module, equalize any static charge difference
between your body and the router by wearing a grounding wrist
strap and attaching it to the router's metal body, or by frequently
touching the router's metal body.
The module has "low-force, high-performance" connectors. High
•
insertion forces are not necessary to install the module, and should not be
used.
Make sure the module is fully inserted. Press the module into the slot until
•
the bulkhead on the module contacts or is very close to contacting the
front face of the router chassis.
Once the module is fully inserted, screw in the two retaining screws to
•
secure the module in place.
For safe operation, proper router cooling, and reduction of
•
electromagnetic emissions, make sure a slot cover is installed on any
unused module slot. For safety, no more than one slot should be
uncovered at a time, even temporarily, when the router is powered on.
Check the temperature specifications for the module; different modules
have different temperature requirements.
2
Advertisement
Table of Contents
