HP Media Center,Pavilion Media Center m200 Hardware Manual page 71

Problem
The monitor doesn't work, even though the
computer appears to.
The mouse doesn't work, even though
everything else does.
Solution
Make sure the monitor is turned on — it has its own power button.
Adjust the brightness and contrast controls on the monitor.
Check the connection of the power cord into the monitor.
Check the cable connection between the monitor and the computer. The cable
connectors must be pushed in all the way.
Make sure the monitor power cord is plugged into a grounded outlet. Check to see
whether the outlet works by plugging another item into it. (If the light on the front of
the monitor is lit, the monitor is getting power.)
If nothing happens when you move the mouse, it's possible that the mouse is
connected improperly.
USB mouse only: Make sure the mouse is firmly connected to the USB port. Try
unplugging and replugging the mouse cable.
PS/2 mouse only: Check that the cable connector pins are straight. Make sure the
mouse is connected to the mouse port, not to the keyboard port. To reconnect these
two cables, turn the computer off, reconnect the cables, and then turn the computer
back on.
(continued)
63