HP Media Center,Pavilion Media Center m200 Hardware Manual page 70

Problem
When I push one of the special or
multimedia buttons on the keyboard,
nothing happens. (continued)
My keyboard doesn't work even though the
computer and monitor seem to work.
62
Solution
5 In the Keyboard Properties window that opens, click the Buttons tab.
6 Double-click the button you want to change. The button configuration window
opens.
7 Choose the button capability from the drop-down list. Enter the Display label and
the Address information. (For a Web site, enter the complete Web site URL in the
Address box.)
8 Click OK.
9 On the Buttons tab, click Apply.
10 Repeat steps 6 through 9 for each button you want to configure.
11 Click OK when you are finished configuring the keyboard.
If the PC beeps repeatedly or if nothing happens when you press keys, it's possible
that the keyboard is connected improperly.
USB keyboards only: Make sure the keyboard is firmly connected to the USB port
on the back or front of the computer. Try unplugging and replugging the keyboard
cable.
PS/2 keyboards only: Check that the cable connector pins are straight. Make sure
the keyboard is connected to the keyboard port, not to the mouse port. If you need
to reconnect these two cables, turn the computer off, reconnect the cables, and then
turn the computer back on.
Try restarting the computer: Click Start, select Turn Off Computer, and click
Restart. If that doesn't work, press and hold the computer On button until the
computer turns off (approximately five seconds). Then turn the computer back on.