HP Media Center,Pavilion Media Center m200 Hardware Manual page 68

Problem
I installed a new printer or other device,
and it won't work.
The computer (or part of it) doesn't seem to
be working.
n
Using the On
button to reset
the PC is not
recommended
and should be
used only as a
last resort.
60
Solution
Be sure that you installed the device drivers that came with the new device.
You may need an updated driver for Windows XP. For non-HP peripherals,
contact the vendor directly. For HP peripherals, visit the HP Web site. Refer to
your Support Guide for details.
When the computer is in standby mode (the On button power indicator light is
flashing), moving the mouse will not wake it. Instead, press the Standby button on
the keyboard or the Standby button on the remote control.
Try restarting the computer as follows:
1 Click Start on the taskbar.
2 Click Turn Off Computer.
3 Click Restart.
If the computer shows no response to mouse or keyboard actions, reset the
computer:
1 Press and hold the On button until the computer turns off.
2 Wait a few seconds, and turn the computer back on.
A software program, software driver, or the operating system software may be
corrupted, erased, or damaged. You can use application recovery or system
recovery to reinstall the software. Refer to "Using Application Recovery and
System Recovery."
(continued)