If You Cannot Turn Off Your Pc Workstation; If You Have Forgotten Your Password - HP Kayak xu700 Troubleshooting Manual

Minitower
Hide thumbs Also See for Kayak xu700:
Table of Contents

Advertisement

Symptom...
PC Workstation does not make a
buzzing or beeping sound when
you press the power button, but
you are still unable to turn it off.
NOTE
Symptom...
You have forgotten the User password.
You have forgotten the Administrator
password.
2 Use or Configuration Problems

If You Cannot Turn Off Your PC Workstation

If You Cannot Turn Off Your PC Workstation
Check that...
You have saved all data and exited all
programs.

If You Have Forgotten Your Password

Use these instructions if the passwords were set with the Setup
program.
1 Switch off the PC Workstation.
2 Restart the PC Workstation. If you are prompted for a password, enter the Administrator
password.
3 When Press F2 to Enter Setup appears, press the F2 key.
4 Enter the Administrator Password to access the Setup program.
5 Go to the Security menu.
6 Go to the Set User Password field and set a new User Password. This will replace the old
password which you had forgotten.
7 Press Esc or select Exit Menu to save the new Password and exit Setup.
1 Switch off the PC Workstation and remove the power cord.
2 Remove the PC Workstation's cover.
3 Set switch
9
on the system board switch block to the
4 Replace the power cord and restart the PC Workstation.
5 When the message Passwords have been cleared appears on screen, switch off the PC
Workstation.
6 Remove the power cord and reset switch
7 Replace the PC Workstation's cover.
8 Switch on the PC Workstation and allow it to complete its startup routine.
9 After the Power-On-Self-Test has completed, press F2 when prompted to use the Setup
program.
10 Set the Administrator and new User Passwords.
11 Press Esc or select Exit Menu to save the new Password and exit Setup.
30
How...
1 Save all data and exit all programs (if you can).
2 Press the power button and keep it pressed for 5 seconds.
The PC Workstation will turn off.
3 Remove the power cord.
Solution...
ON
position.
9
back to the
OFF
position.

Advertisement

Table of Contents
loading

Table of Contents