Internal Features
The core architecture of the HP Kayak XU PC Workstations is constructed
around four buses: Processor-Local (PL) Bus, Peripheral Component Inter-
connect (PCI) bus, Accelerated Graphics Port (AGP) bus and Memory bus.
All models use single or dual Intel Pentium II processors.
Since there is no back-plane, the system board diagram, at the beginning of
the next chapter
(page
main components. The components of the system board are described in
Chapter 2; the characteristics of the PC Workstation's video, disk and
networking devices are described in Chapter 3. The HP BIOS routines are
summarized in Chapter 4; and the Power-On Self-Test routines are
described in Chapter 5.
Specifications and Characteristic Data
Hardware Control Panel
The hardware control panel of the HP Kayak XU PC Workstation has the
following features:
a power on/off button with integrated on/error status light
a press-and-hold RESET button
a PC lock button.
a hard disk activity light.
a network activity light.
Physical Characteristics
System Processing Unit
Weight (excl. keyboard and display):
Dimensions:
Footprint:
Keyboard:
10), shows the locations of all the PC Workstation's
33 lbs (15 kg)
42 cm (D) by 21.1 cm (W) by 41.5 cm (H)
16.48 inches (D) by 8.29 inches (W) by 16.27 inches (H)
2
0.09 m
(0.95 sq. ft.)
18 inches (W) by 7 inches (D) by 1.3 inches (H), when flat, or
18 inches (W) by 7 inches (D) by 2 inches (H), when standing
1 System Overview
Internal Features
3