Activating Adaptive Cruise Control (Acc); To Activate - Chrysler PT Cruiser 2008 Owner's Manual

156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Activating Adaptive Cruise Control (ACC)

You can only activate ACC if the vehicle speed is above
25 mph (40 km/h).
When the system is turned on and in the READY state,
the Electronic Vehicle Information Center (EVIC) dis-
plays "ACC READY."
When the system is OFF, the EVIC displays "ACC OFF."
NOTE: You cannot enable ACC under the following
conditions:
• When you apply the brakes.
• When the parking brake is set.
• When the automatic transmission is in PARK, RE-
VERSE, or NEUTRAL.
• When the Electronic Stability Program (ESP) is
switched off.
• When pushing the RESUME ACCEL switch without a
previously set speed in memory.

To Activate

Push and release the ON/OFF button located on the end
of the speed control lever. The ACC menu in the EVIC
displays "ACC READY."