Useful Features For Camera Recording; Manual Focus; Backlight Compensation - Sharp TWINCAM VL-M6-SL Operation Manual

Video camera recorder 8 ntsc twin lens system
Table of Contents

Advertisement

USEFUL FEATURES FOR CAMERA RECORDING

� REW
1
FULL
FOCUS
O
0
BLC/
2
3
t

MANUAL FOCUS

There will be times when you want to focus the lens
manual ly. To do so:
1
Slide the FULL AUTO switch to OFF.
2
Press the FOCUS button on the top of the
camcorder. The "MANUAL FOCUS" will appear
i n the viewfinder.
3
Press the zoom button (T) to zoom i n .
4
Focus the scene by pressing the FOCUS F (far)
or N (near) button below the viewfinder.
5
Press the zoom button (W) t o compose the
picture .
om
When the s u bject is within approximately 1 . 5 m , and the
lens is zoomed in, it may not be possible to focus clearly.
In this case, zoom out all the way (press W for wide­
angle), and then focus once again.

BACKLIGHT COMPENSATION

This camcorder has Auto Exposure, which automat­
ically adjusts to the scene's brightness. However, if
the subject is backl it or i n a shadow, the subject
may be too dark. In this case, BLC (Back Light
Compensation) will prevent the subject from
appearin g dark.
Press and hold the BLC/GAIN-UP button for BLC.
The
" i n d icator appears in the viewfinder. I n
"
t h i s mode, t h e i ris opens about
in the normal mode.
GAIN-UP
"LIG HT" is displayed in the viewfinder when you
shoot a scene that is too dark. If the BLC/GAIN-UP
button is pressed, the scene becomes brighter and
'(]).&
the
is displayed in the viewfinder to
"
"
indicate that the Gain-up mode is engaged . When
the subject becomes brighter, gain-up disengages
'CDlD "
and "
disappears.
• In the Gain-up mode, there is more picture noise.
• If power is interrupted or the camcorder is switched to
the VCR mode, the Gai n - u p mode will be cancelled.
1
F stop more than
34

Advertisement

Table of Contents
loading

This manual is also suitable for:

Twincam vl-m6-gy

Table of Contents