Chrysler 2007 Sebring Sedan Instruction Manual page 151

is calibrated. Calibrate the compass by completing one or
more 360° turns (in an area free from large metal or
metallic objects) until the "FLASH THE CAL" message
displayed in the EVIC turns off. The compass will now
function normally.
Manual Compass Calibration
If the compass appears erratic, inaccurate, or abnormal,
you may wish to calibrate the compass manually. Prior to
calibrating the compass, make sure the proper zone is
selected. Continue to calibrate the compass manually
using the following steps:
1. Start the engine and leave the transmission selector in
PARK, in order to enter the EVIC Programming Menus.
2. Press the Step Button Several Times until "Personal
Settings" is displayed in the EVIC window.
3. Once in "Personal Settings," Press the STEP button
until "Calibrate Compass Yes" displays in the EVIC
window. Press and release the RESET Button and the
"CAL" indicator will come on solid.
UNDERSTANDING YOUR INSTRUMENT PANEL 151
4. Drive the vehicle slowly, completing one or more
circles (in an area free from large metal or metallic
objects) until the "CAL" message turns off. The compass
will now function normally.
Compass Variance
Compass Variance is the difference between magnetic
North and Geographic North. In some areas of the
country, the difference between magnetic and geographic
North is great enough to cause the compass to give false
readings. If this occurs, the compass variance must be set
using the following procedure:
NOTE: Magnetic materials and cell phones should be
kept away from the top of the Instrument Panel. This is
where the compass sensor is located.
4