Product overview 1.3.1 Exhaust air hood Product liability Systemair is not liable for damages that the product causes in these conditions: • The product is incorrectly installed • The product is repaired with parts that are not original spare parts from Systemair.
Safety Installation Safety definitions To do before installation of product Warnings, cautions and notes are used to point out specially important parts of the manual. • Examine the packaging for transportation damage and re- move the packaging from the product carefully. Warning •...
To install the protective Note: hoods Attach the protective hoods before ODK roof. Caution Exhaust air hood Minimum two persons required for installation of product. Position the hood with the cut-outs against the hinge of the air handling unit. Fasten the hood with the enclosed screws.
Position the hood with the cut-outs against the hinge of the air handling unit. Fasten the hood with the enclosed screws Dimensions Table 1 Dimensions in mm A (Exhaust air) B (Outdoor air) Topvex SR20 Topvex SR25 Topvex SR35 Topvex SR60 Topvex SR70 Topvex SR80 Topvex SR100...
Need help?
Do you have a question about the Topvex SR20 and is the answer not in the manual?
Questions and answers