Autostick General Information - Chrysler 2007 300 SRT8 Owner's Manual

208 STARTING AND OPERATING
• An UPSHIFT message will appear in the Electronic
Vehicle Information Center (EVIC) portion of the in-
strument cluster when using Autostick . This message
appears in order to alert the driver to upshift to the
next gear. The UPSHIFT message will display while
operating the vehicle at higher engine revolutions-per-
minute (RPM).
You can shift in or out of the Autostick mode at any time
without taking your foot off the accelerator pedal. When
you wish to engage Autostick , simply move the selector
lever to the Right (D+) or Left (D-) while in the D (Drive)
position. The transmission will remain in the current gear
until an upshift or downshift is chosen. When you wish
to disengage Autostick , hold the selector lever to the
right for at least one second. The transmission will now
operate automatically, shifting between the five available
gears.

Autostick General Information

• You can start out in first or second gear. The system
will ignore attempts to upshift at too low of a vehicle
speed.
• The transmission will automatically downshift to first
gear when coming to a stop.
• Starting out in second gear is helpful in snowy or icy
conditions.
• Avoid using speed control when Autostick is en-
gaged.
• The transmission will not automatically shift up when
maximum engine speed is reached while Autostick is
engaged.
• Transmission shifting will be more noticeable when
Autostick is engaged.