Explanation Of Symbols And Safety Instructions - HSM ProfiPack P425 Operating Instructions Manual

1 Intended use, warranty
The Profi Pack P425 is exclusively designed for the manufacture of packaging padding
made from cardboard. The machine comes with a 2 year warranty. The warranty period is
6 months when used in multiple shifts. The warranty does not cover wear, damage caused
by improper handling, natural wear or the intervention of third parties

2 Explanation of symbols and safety instructions

Before starting up the machine for the fi rst time, read the operating manual, and
keep it for later use and to pass on to any subsequent users.
Please observe all of the safety instructions attached to the Profi pack.
Risk of injury from the cutting unit
Cutting injuries are possible because of the sharp cutting unit.
Risk of injuries from sharp blades!
Never reach into the slot of the paper feed.
Risk of injury from being pulled in!
Danger to children and other persons!
Keep the Profi pack out of the reach of children.
Only allow the machine to run in the presence of an operator
Danger from electric current
Dangerous mains voltage can lead to electrocution in the event of improper
handling of the machine.
 Check the machine and cable regularly for damage.
 Switch off the Profi pack and disconnect from the power supply in the event of
damage, improper operation and also before changing location or cleaning.
 Make sure that the power plug is easily accessible.
 Before you insert the power plug, make sure that the voltage and frequency of your
power supply comply with the information on the name plate.
 Prevent liquids getting into the Profi pack.
 The machine must not be placed in the vicinity of a radiator or other heat source.
 The ventilation slots must not be blocked or covered and there must be at least 5 cm
space between the shredder and any wall or furniture.
 Never pull the plug out of the socket using the power cable. Always pull out the plug
directly.
Ser
vice work may only be carried out by HSM customer service and the service engineers
from our contract partner.
07/2021
Do not go near the infeed opening with long hair, loose clothing, ties,
scarves, necklaces, bracelets etc. Do not shred any material that
tends to form loops, e.g. tapes, bindings and soft plastic fi lm.
For our customer service addresses see page 168.
Profi Pack P425
english
.
.
9