Compaq Deskpro Workstation AP240 Reference Manual page 24

1
Diskette Eject Button
2
Diskette Drive Activity Light
3
CD-ROM Drive Tray
4
Stereo Headphone Jack
5
Headphone Volume Control
6
CD-ROM Emergency Eject
Hole
7
CD-ROM Drive Busy Indicator
8
CD-ROM Eject Button
9
Dual-State Power Button
:
Power-On Light
;
Hard Drive Activity Light
Ejects a loaded diskette.
Turns on when the diskette drive is reading or saving data.
Loads a CD-ROM into the drive.
Connects headphones to the CD-ROM drive.
Adjusts the volume of the CD-ROM drive.
Allows you to eject a CD-ROM in the event of a power
failure.
Flashes amber when the drive is reading a CD-ROM.
Ejects a CD-ROM from the drive.
Switches the workstation between suspend and wakeup
modes; can be configured as an on/off button.
Turns on when power to the workstation is turned on; blinks
(optional) in Energy Saver mode.
When the system does not detect the expansion board
cage, this light and the hard drive activity light flash at the
same time and at the same rate.
Turns on when the hard drive is reading or saving data.
When the system does not detect the expansion board
cage, this light and the power-on light flash at the same time
and at the same rate.
Reference Guide 1-17