Compaq Deskpro 4000 Technical Reference Manual page 221

E.4.2.1 Driver Information
Controlling the Matrox Millennium-II graphics card in extended VGA modes requires the use of
the appropriate device driver depending on operating system. The device driver(s) for the card is
supplied with the system. Drivers are selected according to the operating system in use. This card
supports a unified driver designed to work with Matrox Millennium, Performance, and
Millennium-II graphics adapters. Changing/updating the device driver can be accomplished by
invoking the Universal Driver Manager (UDM) utility from the Compaq WEB site.
The device driver and operating system together determine the level of feature support provided
by the card. These features are listed as follows:
Windows NT4.0
PC97 logo compliant
Direct Draw 3 support
Dynamic EDID
Additional display mode support
Additional language support
Color calibration/gamma correction
Advanced option setup
Virtual desktop
Unified driver support for Matrox Millennium, Performance, and Millennium II
Uninstall utility
Windows 95
APM 1.2 compliant
Direct Draw 3 support
Dynamic EDID
Additional display mode support
Additional language support
Bus mastering (with diagnostics)
Unified driver support for Matrox Millennium, Performance, and Millennium II
Uninstall utility
Windows 3.1
APM 1.2 compliant
Unified driver support for Matrox Millennium, Performance, and Millennium II
Uninstall utility
Compaq Personal Computers
Original - September 1997
Technical Reference Guide
E-5