Serial Settings - HP Compaq t5725 User Manual
Hp compaq t5725: supplementary guide
Hide thumbs
Also See for Compaq t5725:
- Administrator's manual (92 pages) ,
- Getting started manual (47 pages) ,
- Frequently asked questions manual (6 pages)
Table of Contents
Advertisement
Setup Menus
Serial Settings
This dialog box is displayed by selecting Serial in the Settings menu.
Baud Rate
Factory default: 9600
This option specifies the transmit and receive baud rates for the port selected for host
communications.
Stop Bits
Factory default: 1
This option specifies the number of stop bits sent for each transmitted character.
Parity
Factory default: 8 None
This option specifies the number of data bits and the parity mode for each transmitted
character.
Flow Protocol
Factory default: In/Out
This option specifies the type of flow control used by the line port to communicate
readiness to transmit or receive data from the host.
6-32
None
- No flow control
Input
- Xon/Xoff on received data
Output - Xon/Xoff on transmitted data
In/Out
- Xon/Xoff on transmitted and received data
Advertisement
Table of Contents
