Keyboard Mapping - HP Compaq t5725 User Manual

Getting Started
Alpha Emulations
The ADDS A2 emulation provides compatibility with software designed to drive the
ADDS Viewpoint A2 terminal, as emulated by the Wyse WY-50/50+/60 terminals.
Refer to the Wyse Emulations chapter for more details.
The AIXTerm emulation provides compatibility with software designed to drive an X
terminal using X Windows.
The ANSI-BBS emulation is a derivative of the ANSI device driver ANSI.SYS
supplied with all DOS based PCs and which provides the screen management for the
DOS console screen. PC based UNIX systems and Bulletin Board Systems (BBS)
often rely on the ANSI emulation when being accessed by a PC. In ANSI-BBS mode
the screen size is adjusted to 25 lines and the Preferred Font is automatically set to
ANSI-BBS. The setting of the ANSI Codepage option in this dialog box determines
the characters available in the ANSI BBS set. Refer to the Setup Menus chapter for
details.
The AT 386 emulation provides compatibility with software designed to drive the
AT&T AT 386 terminal.
The AT&T4410 emulation provides compatibility with software designed to drive the
AT&T Dataspeed 4410 terminal. Refer to the AT&T 4410 Emulation section later.
The BQ3107 emulation provides compatibility with software designed to drive the
Bull BQ 3107 terminal. Refer to the BQ 3107 Emulation chapter for details.
The DG410 emulation enables you to run applications written for the Data General
D410 terminal. Refer to the DG410 Emulation chapter for information on keyboard
mapping.
DOC18 emulates VT220+ (DOC-18). It runs the VT300 8-bit emulation, sets the
numeric keypad to application mode, sets the display to 25 lines and enables a special
character set. The function of the keys F1 to F4 on the numeric keypad are mapped to
the first four function keys in the set of F1 to F12 function keys, and F5 to F12
perform the same functions as the equivalent keys on the VT220 keyboard.
The HP70092 emulation enables you to run applications written for the Hewlett
Packard 700/92, 2392A and 2622A terminals. Refer to the HP700/92 Emulation
chapter for details.
The HZ 1500 emulation provides compatibility with software designed to drive the
Hazeltine 1500 terminal, as emulated by the Wyse WY-50/50+/60 terminals. Refer to
the Wyse Emulations chapter for more details.
The IBM 3151 emulation provides compatibility with software designed to drive the
IBM 3151 terminal. Refer to the IBM 3151 Emulation chapter for information.
The IBM 3270 emulation provides compatibility with software designed to drive the
IBM 3270 terminal. Note that the initial display will be an ASCII text screen known as
the Network Virtual Terminal Mode. You are required to make a host connection
using the Telnet facility supplied with TeemTalk in order to display the IBM 3270
2-2