Mouse Functions; Introduction; Selecting & Copying Text - HP Compaq t5725 User Manual

This chapter describes the special functions assigned to the mouse
buttons by TeemTalk and how to redefine the buttons.

Introduction

TeemTalk assigns a variety of special functions to the mouse buttons. Each button can
be used to action up to five functions when pressed in conjunction with modifier keys.
The following table lists the functions assigned to each button and key combination
by default.
Note that usually Button 1 is the leftmost button, Button 2 is the middle button, and
Button 3 is the rightmost button. References to mouse buttons throughout this User's
Guide will assume that they are configured in this way.
Selecting & Copying Text
You can use the mouse buttons to copy and paste text. The region of the display that
will be selected for copying depends on whether you use the Select or Select Rect
angle function. The Select function will select all text from the start position to the
finish position, working left to right across the entire width of the display, whereas the
Select Rectangle function will only select text contained within the rectangular area
defined by the start position (top left corner) and the finish position (bottom right
corner).

Mouse Functions

Mouse Functions
4
4-1