Setting Up A User Account - HP Compaq dx5150 SFF Supplementary Manual

HP ProtectTools Embedded Security

Setting Up a User Account

Ä
✎
10
9. If the user account is to be set up now, make sure the Start
Embedded Security User Initialization Wizard check box is
selected. Click Finish.
Setting up a user account:
■
produces a Basic User key that protects encrypted data
■
sets up a PSD for storing encrypted files and folders
CAUTION: Safeguard the Basic User password. Encrypted data cannot
be accessed or recovered without this password.
To set up a Basic User account and enable the user security features:
1. If the Embedded Security User initialization Wizard is not
open, right-click the HP ProtectTools icon in the system tray,
then left-click Embedded Security User Initialization.
The Embedded Security User initialization Wizard appears.
2. Click Next.
3. Type and confirm a Basic User Key password, then click Next.
Type carefully; for security reasons, the characters typed do not
appear on the screen.
4. Click Next to confirm settings.
5. Select the appropriate Security Features and click Next.
6. Click Next to skip Help files.
7. If more than one Encryption Certificate exists, click the
appropriate certificate.
Click Next to apply the Encryption Certificate.
8. Configure the PSD with appropriate settings and click Next.
9. Configure the PSD again with appropriate settings and click
Next.
www.hp.com HP ProtectTools Embedded Security Guide