LFA VM Lab Mixer User Manual page 25

Timer
The Timer on the VM
®
wires must be disconnected from the machine.
Tools and Materials Needed
• Crosshead screwdriver
• New Timer
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
WARNING: If you do not have sufficient experience in wiring electrical items, do
NOT attempt to replace this part at the risk of electrical shock.
Turn off and unplug the machine before replacing this part.
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this
process.
Remove the Timer
1. Loosen the screws on the top panel with a crosshead screwdriver to remove it.
Note: Before removing the wires, it is recommended to take a photo or make note of the wires'
placement.
2. Unclip the Timer from the machine's wiring.
3. Remove the Timer from the machine.
Lab Mixer can be removed and replaced. To do this, the Timer's plastic
25