Wear Parts And Causes Of Damage - LFA VM Lab Mixer User Manual

Wear Parts and Causes of Damage

Wear Part
V Belt
Bushing
Cause of Damage
The V Belt for the VM
®
the power from the motor to the Hopper via
the Gearbox. Overtime, this will lose some of
its tension and wear, causing the belt to slip,
which affects the mixer's ability to handle the
maximum weight capacity.
Each VM Lab Mixer will have a bushing to
®
support the mixing barrel. If powder builds up
around the bushing, or if it is not cleaned and/
or lubricated properly, it can wear overtime.
Lab Mixer drives all of
23