Flash Memory - HP Compaq t5125 Hardware Reference Manual

Flash Memory

Ä
✎
✎
Hardware Reference Guide
If the thin client can be upgraded with optional flash memory, use the
following instructions as an overview of this procedure.
CAUTION: If necessary, back up any data before continuing the
installation.
In addition to following these instructions, follow the detailed
instructions that accompany the flash memory you have purchased.
1. Complete steps 1 through 4 of the
Sequence" on page
2. Remove any existing flash memory, if installed.
A set of needle-nose pliers may be required when removing the flash
memory module.
3. Verify the location of the round opening on the flash memory
card and align it with the plastic stem on the system board.
4. Insert the new flash memory with the connectors facing down as
shown in the following illustration.
Installing Optional Flash Memory
5. Re-attach the side access panel.
www.hp.com
"General Hardware Installation
2-1.
Hardware Upgrades
2-5