Akuvox IT88 Series Admin Manual

Akuvox IT88 Series Admin Manual

Indoor monitor
Hide thumbs Also See for IT88 Series:
Table of Contents

Advertisement

Quick Links

Version: 1.0 | Date: JUN.2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IT88 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Akuvox IT88 Series

  • Page 1 Version: 1.0 | Date: JUN.2022...
  • Page 2 About This Manual Thank you for choosing the Akuvox IT88 series indoor monitor. This manual is intended for the administrators who need to properly configure the indoor monitor. This manual applies to the 88.30.1.108 version, and it provides all the configurations for the functions and features of the IT88 series door phone.
  • Page 3 Introduction of Icons and Symbols Warning:  Always abide by this information in order to prevent the persons from injury. Caution:  Always abide by this information in order to prevent the damages to the device. Note:  Informative information and advice from the efficient use of the device.
  • Page 4 Related Documentation You are advised to refer to the related documents for more technical information via the link below: https://knowledge.akuvox.com...
  • Page 5: Table Of Contents

    Table of Contents 1. Product Overview ..................10 2. Change Log ..................... 11 3. Model Difference ..................12 4. Introduction to Configuration Menu ............13 5. Access the Device ................... 15 5.1. Device Start-up Network Selection ............ 15 5.2. Accessing the Device Setting on the Device ........16 5.2.1.
  • Page 6 8.1.1. Configure Volume on the Device ..........31 8.1.1.1. Configure Volume on the Web Interface ....... 32 9. Phone Book Configuration ...............34 9.1. Phone Book Configuration on the Device .......... 34 9.1.1. Add contact ................34 9.1.2. Edit Contact ................35 9.1.3. Block List setting on the device ..........36 9.2.
  • Page 7 11.3. SIP Account Registratio ..............52 11.4. SIP Server Configuration ..............55 11.5. Outbound Proxy Server configuration ..........56 11.6. SIP Call DND & Return Code Configuration ........57 11.7. Device Local RTP configuration ............57 11.8. Data Transmission Type Configuration ........... 58 11.9.
  • Page 8 14.2.2. Configure Alarm and Arming on the Web Interface ....76 14.2.3. Configure Location-based Alarm .......... 77 14.2.4. Configure Alarm Text ..............78 14.2.5. Configure Arming mode ............79 14.2.6. Configure Alarm Ringtone ............79 14.2.7. Alarm Action Configuration ............80 14.2.7.1. Select Alarm Action Types ...........80 14.2.7.2.
  • Page 9 18. Backup ....................95 19. Auto-provisioning via Configuration File ..........96 19.1. Provisioning Principle ............... 96 19.2. Introduction to the Configuration Files for Auto-Provisioning ..97 19.3. Autop Schedule ................. 98 19.4. DHCP Provisioning Configuration ............ 99 19.5. Static Provisioning Configuration ..........101 20.
  • Page 10 26.1. Reboot ....................125 26.1.1. Reboot on the Device ............125 26.1.2. Reboot on the Web Interface ..........126 26.2. Reset ....................126 26.2.1. Reset on the Device .............. 126 26.2.2. Reset on the Web Interface ..........127 27. Abbreviations ..................129 28.
  • Page 11: Product Overview

    IT88 Series Administrator Guide 1.Product Overview IT88 series is an Android SIP-based with a smooth touch-screen indoor monitor. It can be connected with the Akuvox door phone for audio/video communication, unlocking, and monitoring. Residents can communicate with visitors via audio/video call, and it supports unlocking the door remotely. It is more convenient and safer for residents to check the visitor’s identity...
  • Page 12: Change Log

    IT88 Series Administrator Guide 2.Change Log The change log will be updated here along with the changes in the new software version. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 13: Model Difference

    IT88 Series Administrator Guide 3.Model Difference Model IT88S IT88A Feature Quad Core Cortex-A55/1.9GHz Android 9.0 Color Black Display 10 inch IPS LCD Resolution 1280 x 800 Single microphone,-58dB Speaker Dual speakers, 4Ω / 3W Wi-Fi IEEE 802.11 b/g/n Bluetooth BLE 4.1...
  • Page 14: Introduction To Configuration Menu

     Mode selection: Discovery mode: It is a plug and plays configuration mode. Akuvox devices will configure themselves automatically when users power on the devices and connect them to the network. It is a super time-saving mode and it will greatly bring users convenience by reducing manual operations.
  • Page 15 3. Akuvox PC Manager: distribute all configuration items in batch on a LAN. 4. IP scanner: it is used to search Akuvox device IP addresses on a LAN. 5. FacePro: manage face data in batch for the door phone on a LAN.
  • Page 16: Access The Device

    IT88 Series Administrator Guide 5.Access the Device Akuvox indoor monitor system settings can be either accessed on the device directly or on the device web interface. 5.1. Device Start-up Network Selection Akuvox indoor monitor system settings can be either accessed on the device directly or on the device's web interface.
  • Page 17: Accessing The Device Setting On The Device

    IT88 Series Administrator Guide Note:  Please refer to the chapter on Network Setting&Other connection for the configuration of the Ethernet and wireless network connection. 5.2. Accessing the Device Setting on the Device 5.2.1.Accessing Device Basic Setting. You can access the device's basic settings and advance settings where you can configure different types of functions as needed.
  • Page 18 IT88 Series Administrator Guide To access the advanced setting, press Setting then press Advance Settings icon. Press password 123456 to enter the advanced setting. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 19: Access The Device Setting On The Web Interface

    IT88 Series Administrator Guide 5.3. Access the Device Setting on the Web Interface You can also enter the device IP address on the web browser in order to log in to the device web interface by user name and password admin/admin where you can configure and adjust parameters, etc.
  • Page 20 IT88 Series Administrator Guide Note  You can also obtain the device IP address using the Akuvox IP scanner to log in to the device web interface. Please refer to the URL below for the IP scanner application: https://knowledge.akuvox.com/docs/akuvox-ip-scanner Note ...
  • Page 21: Language And Time Setting

    IT88 Series Administrator Guide 6.Language and Time Setting 6.1. Language Setting When you first set up the device, you might need to set the language to your need or you can do it later if needed. Language setting can be configured on the device that allows you to select or change the language for screen display to your preference.
  • Page 22: Time Setting On The Device

    IT88 Series Administrator Guide 6.2.1.Time Setting on the Device To set up time setting on the device Settings > Time&Language screen. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 23: Time Setting On The Device Web Interface

    IT88 Series Administrator Guide Parameter Set-up:  Automatic Date: automatic Date is switched on by default, which allows the date& time to be automatically set up and synchronized with the default time zone and the NTP server (Network Time Protocol). You can also set it up manually by checking off the square box and then entering the time and date you want and pressing the Save tab to save the setting.
  • Page 24 IT88 Series Administrator Guide notify the NTP server of its time zone so that the NTP server can synchronize the time zone setting in your device. Parameter Set-up:  NTP Server: enter the NTP server you obtained in the NTP server field.
  • Page 25: Screen Display Configuration

    IT88 Series Administrator Guide 7.Screen Display Configuration IT88 series indoor monitor allows you to enjoy a variety of screen displays to enrich your visual and operational experience through the customized setting to your preference. 7.1. Screen Display setting on the Device You can configure a variety of features of the screen display in terms of brightness, screen saver and font size, etc.
  • Page 26 IT88 Series Administrator Guide Parameter set-up:  Brightness: press on the brightness setting and move the yellow dots to adjust the screen brightness. The default brightness is “145”.  Sleep Time: set the timing for the device screen to be turned off. You can select the timing among eight options: 15 seconds,...
  • Page 27 IT88 Series Administrator Guide Videos, SDMC+Local Videos, Clock. Details for the screen saver types are shown below: Screen Saver Type Description Type SDMC Pictures Display pictures from SDMC as the screen saver. Display picture uploaded to the indoor monitor as Local Pictures the screen saver.
  • Page 28: Screen Display Setting On The Web Interface

     Wallpaper: click to select the local wallpaper. 7.2. Screen Display Setting on the Web Interface IT88 series indoor monitor allows you to enjoy a variety of screen displays to enrich your visual and operational experience through the customized setting to your preference.
  • Page 29: Upload Wall Paper

    IT88 Series Administrator Guide Note:  The previous pictures with a specific ID order will be overwritten when the repetitive designation of pictures to the same ID order occurred. 7.2.2.Upload Wall Paper You customize your screen background picture on device web Device >...
  • Page 30: Icon Screen Display Configuration

     The pictures uploaded should be in .png or .zip format. 7.3. Icon Screen Display Configuration IT88 series indoor monitor allows you to customize icon display on the home screen and one more screen for the convenience of your operation on device web Device >...
  • Page 31 IT88 Series Administrator Guide displayed on the home screen. If “Browser” is selected, you are required to enter the URL of the browser before the browser icon can be displayed. while the value is not applicable to other icon types.
  • Page 32: Sound And Volume Configuration

    IT88 Series Administrator Guide 8.Sound and Volume Configuration Akuvox IT88 series indoor monitors provide you with various types of ringtone and volume configurations ranging from Mic volume, Ring volume, Talk volume, Tone volume and Media volume. You can configure them on the device directly or on the web interface.
  • Page 33: Configure Volume On The Web Interface

    IT88 Series Administrator Guide Parameter Set-up:  Ring Volume: adjust the incoming call ringtone volume.  Talk Volume: adjust the speaker volume during the call.  Mic Volume: adjust the volume of your voice to be heard.  Tone Volume: adjust the dial tone volume.
  • Page 34 IT88 Series Administrator Guide Note:  Doorbell sound files and Alarm Ringtone files to be uploaded must be .WAV or MP3 format. No limitation on the file size. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 35: Phone Book Configuration

    IT88 Series Administrator Guide 9.Phone Book Configuration 9.1. Phone Book Configuration on the Device You can configure the contacts list in terms of adding and modifying contact groups or contacts on the device Contacts > Local Contacts directly. 9.1.1.Add contact Parameter Set-up: ...
  • Page 36: Edit Contact

     Number: enter the IP or SIP number to save.  CameraUrl: enter the RTSP URL for video preview. Note: Akuvox devices RTSP URL format is rtsp://device IP/live/ch00_0. if  you use a third-party device, please confirm the URL format with their company.
  • Page 37: Block List Setting On The Device

    IT88 Series Administrator Guide 9.1.3.Block List setting on the device Choose which contact on the contact list you want to be added to the blocklist. Note:  You can delete contacts regardless of whether it is on the All Contacts screen or the Blocklist screen 9.2.
  • Page 38: Contact Configuration

    IT88 Series Administrator Guide 9.2.1. Contact Configuration To conduct contact configuration on web Contacts > Local Contacts > Local Contacts List interface. Parameter set-up: Name: enter the contact name to be saved.  Number: enter the contact number (SIP or IP number ) to be saved.
  • Page 39: Contact Management

    IT88 Series Administrator Guide 9.2.2. Contact Management You can search, display, edit, and delete the contacts in your contacts list on web Contacts > Local Contacts > Local Contacts List interface. You can dial out using the contact phone number on Contacts > Local Contacts >...
  • Page 40: Contacts Import And Export On The Web Interface

    IT88 Series Administrator Guide Note:  If you want to remove the contact from the blocklist on the web interface, you can change the group to “Default" when editing the contact. 9.2.4. Contacts Import and Export on the Web Interface...
  • Page 41 IT88 Series Administrator Guide Note:  The contact file can only be imported or exportd in .xml or .csv format. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 42: Network Setting & Other Connection

    IT88 Series Administrator Guide 10. Network Setting & Other Connection 10.1.Device Network Configuration You can check for the door phone’s network connection info and configure the default DHCP mode (Dynamic Host Configuration Protocol) and static IP connection for the device either on the device or on the device web interface.
  • Page 43 IT88 Series Administrator Guide Parameter Set-up:  DHCP: select the DHCP mode by moving the toggle switch to the right. DHCP mode is the default network connection. If the DHCP mode is turned on, then the door phone will be assigned by the DHCP server with IP address, subnet mask, default gateway, and DNS server address automatically.
  • Page 44: Configuring Device Network Connection On The Web Interface

    IT88 Series Administrator Guide Note:  You press System Info icon then press Network tab on the Settings screen to check the device network status.  The default system code is “123456". 10.1.2. Configuring Device Network Connection on the Web Interface To check the network on the web Status >...
  • Page 45 IT88 Series Administrator Guide Parameter Set-up:  DHCP: select the DHCP mode by checking the DHCP box. DHCP mode is the default network connection. If the DHCP mode is selected, then the indoor monitor will be assigned by the DHCP server with IP address, subnet mask, default gateway, and DNS server address automatically.
  • Page 46: Device Deployment In Network

    IT88 Series Administrator Guide 10.2.Device Deployment in Network Akuvox IT88 series indoor monitors should be deployed before they can be properly configured in the network environment in terms of their location, operation mode, address and extension numbers as opposed to other devices for device control and the convenience of the management.
  • Page 47: Device Nat Setting

     RPort: check the RPort when the SIP server is in WAN (Wide Area Network). 10.4. Device Bluetooth Setting 10.4.1. Device Bluetooth Pairing After IT88 series indoor monitors turn on the Bluetooth on the device Settings > Bluetooth screen, it can be paired with other devices via Bluetooth. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 48: Device Bluetooth Data Transmission

    IT88 Series Administrator Guide 10.4.2. Device Bluetooth Data Transmission To transfer data via Bluetooth by pressing Pair new device. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 49: Device Wi-Fi Setting

    IT88 Series Administrator Guide Note: After successful Bluetooth pairing, data transmission can be  carried out. 10.5.Device Wi-Fi Setting In addition to wired connection, the device also supports Wi-Fi connection. To set the Wi-Fi on device Settings > Advance Settings > WIFI screen.
  • Page 50 IT88 Series Administrator Guide AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 51: Intercom Call Configuration

    IT88 Series Administrator Guide 11. Intercom Call Configuration 11.1.IP call & IP Call Configuration IP calls and SIP calls can be made directly on the intercom device by entering the IP number on the device. And you can also disable the direct IP call if you allow no IP call to be made on the device.
  • Page 52: Ip Call Configuration

    IT88 Series Administrator Guide 11.1.2. IP Call Configuration To configure the IP call feature and port on the device web Device > Call Feature > Others interface. Parameter Set-up: AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 53: Sip Call &Sip Call Configuration

    11.3.SIP Account Registration Akuvox IT88 series indoor monitors support two SIP accounts that can all be registered according to your applications. For example, you can switch between the two SIP accounts. The SIP account can be configured on the device and on the device interface.
  • Page 54 IT88 Series Administrator Guide Parameter Set-up:  Account1/Account2: select Account1 or Account2. Account1 is the default SIP account. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 55 IT88 Series Administrator Guide  SIP Port: enter the SIP server port for communication. The SIP port is "5060" by default. The parameter settings for SIP account registration can be configured on the Account setting screen and they can also be configured on the device web Account >...
  • Page 56: Sip Server Configuration

    IT88 Series Administrator Guide SIP account administrator.  Username: enter the user name obtained from the SIP account administrator.  Password: enter the password obtained from the SIP server. 11.4.SIP Server Configuration SIP server can be set up for device in order to achieve call sessions through the SIP server between intercom devices.
  • Page 57: Outbound Proxy Server Configuration

    IT88 Series Administrator Guide 11.5.Outbound Proxy Server configuration An outbound proxy server is used to receive all initiating request messages and route them to the designated SIP server in order to establish call sessions via port-based data transmission. To configure the outbound Proxy server on Account >...
  • Page 58: Sip Call Dnd & Return Code Configuration

    IT88 Series Administrator Guide 11.6.SIP Call DND & Return Code Configuration DND (Do not disturb) setting allows you not to be disturbed by any unwanted incoming SIP calls. You can set up DND related parameters properly on the device web Device > Call Feature > DND interface to block SIP calls you do not intend to answer.
  • Page 59: Data Transmission Type Configuration

    IT88 Series Administrator Guide Parameter set-up:  Starting RTP Port: enter the Port value in order to establish the start point for the exclusive data transmission range.  Max RTP port: enter the Port value in order to establish the endpoint for the exclusive data transmission range.
  • Page 60: Call Setting

    IT88 Series Administrator Guide  TCP: select “TCP” for Reliable but less-efficient transport layer protocol.  TLS: select “TLS” for Secured and Reliable transport layer protocol.  DNS-SRV: select “DNS-SRV” to obtain DNS record for specifying the location of services. And SRV not only records the server address but also the server port.
  • Page 61: Auto-Answer Allow List Setting

    IT88 Series Administrator Guide Parameter Set-up: Auto Answer: turn on the Auto Answer function by ticking the square  box. Auto Answer Delay: set up the delay time (from 0-30 sec.) before the  call can be answered automatically. For example, if you set the delay time as 1 second, then the call will be answered in 1 second automatically.
  • Page 62 IT88 Series Administrator Guide SIP/IP numbers can be imported to or exported out of the indoor monitor in batch on web Device > Call Feature > Auto Answer AllowList > Import/Export interface. Note:  SIP/IP number files to be imported or exported must be in either .xml or .csv format.
  • Page 63: Live Stream Setting

    IT88 Series Administrator Guide 11.9.3. Live Stream Setting Receive Live Stream on the indoor monitor allows you to see the video image (one-way video stream) from the calling device such as a door phone whether or not you answered the call in audio or video mode, while the video image from your indoor monitor will not be sent to the calling devices in order to protect your privacy.
  • Page 64: Emergency Call Setting

    IT88 Series Administrator Guide If you want to see the image at the door station before answering the incoming call, you can enable the intercom preview function on web Device > Intercom > Intercom interface. Parameter Set-up:  Intercom Active: tick the check box to enable or disable the intercom function.
  • Page 65 IT88 Series Administrator Guide After setup on web, you also need to do the configuration on device Settings > Advance Settings > SOS screen. Parameter Set-up:  Call Number: to setup 3 SOS numbers. Once users press the SOS key on the home page (SOS display key shall be set on the web manually), indoor monitors will call out the number in order.
  • Page 66: Multicast Configuration

    IT88 Series Administrator Guide 11.12. Multicast Configuration IT88 allows you to conduct one-to-many broadcasting via a multicast function on web Device > Multicast > Multicast List interface. 11.13. Call Forwarding Setting Call Forward is a feature used to redirect an incoming call to a specific third party.
  • Page 67: Call Forwarding Configuration On The Web Interface

    IT88 Series Administrator Guide Parameter Set-up:  Account: to choose which account shall implement the call forwarding feature.  Always Forward: to enable the Always Forward function; all incoming calls will be automatically forwarded to a specific number.  Busy Forward: to enable the Busy Forward function; incoming calls will be forwarded to a specific number if the phone is busy.
  • Page 68 IT88 Series Administrator Guide To set up forward function on web Device > Call Feature > Call Forward interface. Parameter Set-up:  Always Transfer: to enable the Always Forward function; all incoming calls will be automatically forwarded to a specific number.
  • Page 69: Intercom Message Setting

    Parameter Set-up:  Notification: the message from the property manager, this feature is only available when using SDMC or Akuvox SmartPlus.  Text MSG: to send or receive or manage the text message here.  Owner MSG: if you enable this feature, and nobody answers the incoming call within the pre-configure ring time, the visitor will hear the owner’s...
  • Page 70: Configure Voice Message (Mwi)

    IT88 Series Administrator Guide  Visitor MSG: if you enable the visitor message feature, and nobody answers the incoming call within the pre-configure ring time, it will save the visitor record.  Family MSG: you can record the audio messages for your family members.
  • Page 71: Audio& Video Codec Configuration For Sip Calls

    SIP Calls 13.1.Audio Codec Configuration Akuvox indoor monitor supports seven types of Codec (iLBC_13_3, iLBC_15_2, L16, PCMU, PCMA, G729, G722 for encoding and decoding the audio data during the call session. Each type of codec varies in terms of sound quality.
  • Page 72: Video Codec Configuration

    13.2.Video Codec Configuration IT88 series supports VP8, H263, H264, H265 codec that provides a better video quality at a much lower bit rate with different video quality and payload. To do the configuration on web Account > Advanced > Video Codecs interface.
  • Page 73 IT88 Series Administrator Guide Parameter Set-up:  Name: Check to select the H264 video codec format for the door phone video stream. H264 is the video codec by default.  Resolution: select the code resolution for the video quality among four options: ”QCIF”, “CIF”, “VGA”, “4CIF”...
  • Page 74: Security

    You can configure the monitor setting on the web Device > Monitor interface. Enter the IP/SIP number of door phone in device number and fill in the device name. Then set up the RTSP address. The RTSP format of the Akuvox door phone is rtsp://deviceIP/live/ch00_0. Enable or disable display in the call.
  • Page 75: Video Image Capturing

    IT88 Series Administrator Guide 14.1.2. Video Image Capturing To capture a video image by pressing Monitor > Capture on the device screen. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 76: Alarm And Arming Configuration

    14.2.Alarm and Arming Configuration Alarm feature is used to connect some alarm detection devices to protect your home safe. Akuvox indoor monitors support 8 alarm connectors which means you can connect 8 different alarm sensors in different rooms of your house.
  • Page 77: Configure Alarm And Arming On The Web Interface

    IT88 Series Administrator Guide 14.2.2. Configure Alarm and Arming on the Web Interface To set up a location-based alarm sensor on the device web Arming> Zone Setting > Zone Setting interface. Parameter Set-up:  Location: set up the location according to where the alarm sensor is installed.
  • Page 78: Configure Location-Based Alarm

    IT88 Series Administrator Guide  Zone Type: set up the alarm sensor types. You can select among five sensor types: “Infrared”, “Drmagnet”, “Smoke”, “Gas”, “Urgency”.  Trigger Mode: set sensor trigger mode between “NC” and “NO” according to your need.
  • Page 79: Configure Alarm Text

    IT88 Series Administrator Guide  Location: to select which location the detection device is in, including Bedroom, Guest room, Hall, Window, Balcony, Kitchen, Study and Bathroom.  Zone type: to select which type of detection device is, including Infrared, Drmagnet, Smoke, Gas, and Urgency.
  • Page 80: Configure Arming Mode

    IT88 Series Administrator Guide 14.2.5. Configure Arming mode To switch arming mode, disarm the alarm on Arming screen by pressing their respective icons. Press Disarm icon if you want to clear the Arming Mode. 14.2.6. Configure Alarm Ringtone You can upload a customized alarm ringtone by choosing the local audio file on web Phone >...
  • Page 81: Alarm Action Configuration

    IT88 Series Administrator Guide Note:  The file format of the customized ringtone should be .wav. 14.2.7. Alarm Action Configuration The triggering of the alarm sensor can be accompanied by the actions you configured in the forms of HTTP command, SIP Message, Call, and Local Relay for different security purposes.
  • Page 82 IT88 Series Administrator Guide Parameter Set-up: HTTP Command: enable the HTTP command if you want the action to  be implemented on a designated third-party device SIP Message: enable SIP message if you want the SIP message to be ...
  • Page 83: Configure Alarm Action Via Http Command

    IT88 Series Administrator Guide 14.2.7.2. Configure Alarm Action via HTTP Command To set up the HTTP Command action, you can click “Enable” in the Send HTTP field to enable the actions for the alarm sensor installed in different locations. Then enter the HTTP command provided by the manufacturer of the device on which the action is to be carried.
  • Page 84: Check Alarm Log

    IT88 Series Administrator Guide To set up the call action, you can enter the SIP or IP number of the device to be called as an action, then enable Alarm Siren for arming zone as needed. 14.2.8. Check Alarm Log To check alarm log on device Settings >...
  • Page 85: Screen Unlock Setting

    IT88 Series Administrator Guide 14.3.Screen Unlock Setting You can enable screenlock function directly on the device Settings > Display Setting screen. The device screen will be locked over sleep time. You are required to wake up the device through face recognition (Face ID) or password.
  • Page 86: Voice Encryption

     The default unlock PIN is 123456. 14.4.Voice Encryption The encryption function provides you with greater security for the intercom call. And, IT88 series support three modes of voice encryption: SRTP(compulsory), SRTP(Optional), ZRTP(Optional) on web Account > Advanced > Encryption interface.
  • Page 87: Remote Control

    IT88 Series Administrator Guide Parameter Set-up:  Voice Encryption: select encryption mode from four options. If you select to disable it, the call will not be encrypted. SRTP(Compulsory), all audio signals (technically speaking it is RTP streams) will be encrypted to improve security.
  • Page 88: Door Access Control Configuration

    IT88 Series Administrator Guide 15. Door Access Control Configuration 15.1.Relay Switch Setting 15.1.1. Local Relay Setting Local relays in IT88 indoor monitor can be used to trigger the relay for the door access and trigger the chime bell as needed in different scenarios. You can do this configuration on web Phone >...
  • Page 89: Remote Relay Switch Setting

    IT88 Series Administrator Guide 15.1.2. Remote Relay Switch Setting You can use the unlock tab during the call to open the door on web Phone > Relay > Relay Setting > Remote Relay interface. You are required to set up the same DTMF code in the door phone and indoor monitor.
  • Page 90: Door Unlock Configuration

    IT88 Series Administrator Guide Parameter Set-up:  IP address: enter the web relay IP address.  User Name: enter the User name provided by the web relay manufacturer.  Password: enter the password provided by the web relay manufacturer. The passwords are authenticated via HTTP and you can define the passwords using “HTTP get”...
  • Page 91: Door Unlock Via Http Command

    IT88 Series Administrator Guide DTMF codes can be configured on the web Account > Advanced > DTMF interface where you can set up identical DTMF codes on the corresponding intercom devices, which allows residents to enter the DTMF code on the soft keypad or press the DTMF code attached unlock tab on the screen to unlock the door for visitors etc., during a call.
  • Page 92 IT88 Series Administrator Guide You can unlock the door remotely without approaching the device physically for the door access by typing the created HTTP command (URL) on the web browser to trigger the relay when you are not available by the door for the door access.
  • Page 93: Lift Control

    IT88 Series Administrator Guide 16. Lift Control You can summon lift at home via the lift control feature. 16.1.Configure Lift Control To enable and set the display status Lift icon on device web Device > Lift> Lift Control interface. Parameter set-up: ...
  • Page 94 IT88 Series Administrator Guide When the lift controller receives the HTTP command, it will feedback the current lift status with a prompt. To do this configuration on web Device > Lift> Hints interface. Edit the HTTP Status Code, and feedback code from the lift control board.
  • Page 95: Firmware Upgrade

    IT88 Series Administrator Guide 17. Firmware Upgrade Firmwares of different versions for the indoor monitor can be upgraded on the device web Upgrade > Basic interface. Note:  Firmware files should be .zip format for the upgrade. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 96: Backup

    IT88 Series Administrator Guide 18. Backup Configuration files can be imported to or exported out of the device to your local PC on the device web Upgrade > Advanced > Others interface if needed. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 97: Auto-Provisioning Via Configuration File

    Auto-provisioning is a feature used to configure or upgrade the devices in batch via third-party servers. DHCP, PNP, TFTP, FTP, and HTTPS are the protocols used by the Akuvox intercom devices to access the URL of the address of the third-party server which stores configuration files and firmware, which will then be used to update the firmware and the corresponding parameters on the door phone.
  • Page 98: Introduction To The Configuration Files For Auto-Provisioning

    IT88 Series Administrator Guide 19.2.Introduction to the Configuration Files for Auto-Provisioning Configuration files have two formats for auto-provisioning. one is the general configuration files used for the general provisioning and another one is the MAC-based configuration provisioning. The difference between the two types of configuration files is shown below: ...
  • Page 99: Autop Schedule

    IT88 Series Administrator Guide 19.3.Autop Schedule Akuvox provides you with different Autop methods that enable the indoor monitor to perform provisioning for itself in a specific time according to your schedule. To set up the schedule on device web Upgrade > Advanced >...
  • Page 100: Dhcp Provisioning Configuration

    IT88 Series Administrator Guide 19.4.DHCP Provisioning Configuration Auto-provisioning URL can also be obtained using DHCP option which allows the device to send a request to a DHCP server for a specific DHCP option code. If you want to use Custom Option as defined by users with option code range from 128-255), you are required to configure DHCP Custom Option on the web Upgrade >...
  • Page 101 IT88 Series Administrator Guide Note:  The custom Option type must be a string. The value is the URL of TFTP server. Parameter Set-up:  Custom Option: enter the DHCP code that matched the corresponding URL so that the device will find the configuration file server for the configuration or upgrading.
  • Page 102: Static Provisioning Configuration

    IT88 Series Administrator Guide Note:  The general configuration file for the in-batch provisioning is with the format “cfg” taking R29 as an example, r000000000029.cfg ( 10 “zeros” in total while the MAC-based configuration file for the specific device provisioning is with the format ”MAC_Address of the device.cfg”, for example, “0C110504AE5B.cfg.”...
  • Page 103 HTTP: http://192.168.0.19/ (use the default port 80)  http://192.168.0.19:8080/ (use other ports, such as 8080)  HTTPS: https://192.168.0.19/ (use the default port 443)  Note: Akuvox does not provide user specified server.  Please prepare TFTP/FTP/HTTP/HTTPS server by yourself.  AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 104: Voice Assistant

    IT88 Series Administrator Guide 20. Voice Assistant You can configure a voice assistant named "Albert" to perform a variety of functions related to intercom calls, open-door, arming modes, etc. on the device. And you can also set up the specific relay to be triggered by the voice assistant for the door access control.
  • Page 105 IT88 Series Administrator Guide stay silent while carrying out what it is made to do according to your voice commands.  Supported Command: enable or disable the 22 voice commands according to your need.  Answer Call Permission: enable it when you so that you can answer or reject the incoming call via voice assistant by replay "Yes"...
  • Page 106 IT88 Series Administrator Guide opened, have a nice dream Made it, good night  Started sweet  dreams! away mode Use it when you want to Sure, away mode is on  change the arming mode OK, start away mode ...
  • Page 107 IT88 Series Administrator Guide disable Use it when you want to Yes, closed it for you  disable the DND mode Welcome back, DND is  closed,  mingle with the world Sure, DND is off  10 enable Use it when you want to OK, DND is on ...
  • Page 108 IT88 Series Administrator Guide 16 open use it when you want to Got it, please check  message check text message. message  opened, you can write some contents to send Message is ready for  already opened it for ...
  • Page 109 IT88 Series Administrator Guide Voice Command Setting section to select a specific relay to bet triggered via voice assistant. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 110: Call Log

    IT88 Series Administrator Guide 21. Call Log If you want to check on the calls inclusive of the dial-out calls, received calls, and missed calls in a certain period of time, you can check and search the call log on the device web Contacts > Call Logs interface and export the call log from the device if needed.
  • Page 111: Debug

     Log Level: select log levels from 1 to 7 levels. You will be instructed by Akuvox technical staff about the specific log level to be entered for debugging purpose. The default log level is “3”.the higher the level is, the more complete the log is.
  • Page 112: Pcap For Debugging

    22.2. PCAP for Debugging PCAP in Akuvox indoor monitor is used to capture the data package going in and out of the devices for debugging and troubleshooting purpose. You can set up the PCAP on the device web Upgrade > Advanced > PCAP interface properly before using it.
  • Page 113: User Agent

    IT88 Series Administrator Guide data packet capturing when the data packet captured reaches the maximum capturing capacity of 1MB. 22.3. User Agent User agent is used for identification purpose when you are doing analysis on the SIP data packet. To do this configuration on web Account > Advanced interface.
  • Page 114: Device Integration With Third Party

    IT88 Series Administrator Guide 23. Device Integration with Third Party 23.1.Enter Applications Screen The content of this part mainly teaches you how to enter the APK interface through hidden operations. To do the configuration on device Settings > System Info interface. you can press on User Mode 10 times and press “Admin Mode”...
  • Page 115: Install Third-Party App

    IT88 Series Administrator Guide 23.2. Install Third-party App You can install the third-party App to your device on the device web Device >Third Party APK interface. Choose a suitable .apk file from the PC to upload. If you want to clear the apk file uploaded, click Reset.
  • Page 116 IT88 Series Administrator Guide Parameter Set-up:  App Name: select the App Name to be configured.  Interval Without Operating (Sec): tick the check box to set the app returning time-interval when there is no operation on the device.  Start Up Enable: tick the check box of Start UP Enable if you want the app to be run automatically when the device is turned on.
  • Page 117: Pbx Feature

    IT88 Series Administrator Guide 24. PBX Feature IT88 Android indoor monitor has built the PBX server which makes the indoor station not only used as an intercom monitor but also a SIP PBX, users do not bother to prepare an extra SIP PBX again. The PBX supports call, forward, transfer, conference, ring group feature and so on.
  • Page 118: Manage Pbx Accounts

    IT88 Series Administrator Guide In the PBX interface, clicking Setting on the right top corner enables the PBX. 24.1.2. Manage PBX Accounts You can check the basic PBX information like PBX server and port and accounts status. AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 119 IT88 Series Administrator Guide Parameter Set-up:  Status: to show whether the account is registered or not.  Username: to enter the extension number registered onto the SIP server.  Display Name: to enter the display name of this account, which will show on other devices when making calls.
  • Page 120: Manage Pbx Groups

    IT88 Series Administrator Guide  Caller Party: the caller party number. 24.1.3. Manage PBX Groups Click Group on the right top corner to add a new ring group or edit the existing group. One number can be added in different ring groups. Once receiving an incoming call, the numbers in one group will ring up at the same time.
  • Page 121: Pbx Configuration On The Web Interface

    IT88 Series Administrator Guide Parameter Set-up:  Group Name: the name of a ring group.  Quick Dial: a number of this ring group. 24.2.PBX Configuration on The Web Interface You can do the same configuration on web PBX > Basic and PBX > Ring Group interface.
  • Page 122 IT88 Series Administrator Guide AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 123: Password Modification

    IT88 Series Administrator Guide 25. Password Modification 25.1.Modify Device Basic Setting Password To do the configuration on device Settings > Advanced Settings > Protected Code screen to choose System Code change a new password. The default password is 123456. 25.2.Modify Device Advanced Setting Password This password is used to enter the advanced settings of the device, including password settings, account numbers, SOS numbers, network settings, etc.
  • Page 124: Modify Device Web Interface Password

    IT88 Series Administrator Guide 25.3.Modify Device Web Interface Password To modify the web interface password, you can do it on the device web Security > Basic > Web Password Modify interface. Select "Admin" for the administrator account and “User" for the User Account. Click the Change Password tab to change the password.
  • Page 125: Modify Browser Password

    IT88 Series Administrator Guide 25.4.Modify Browser Password This password is used to lock the browser on the device in case someone abuses the browser for any unwanted application. You can do this configuration on device Settings > Advanced Settings > Protected Code >...
  • Page 126: System Reboot&Reset

    IT88 Series Administrator Guide 26. System Reboot&Reset 26.1.Reboot 26.1.1. Reboot on the Device If you want to restart the system setting of the device, you can operate it directly on the device setting screen or on the device web interface.
  • Page 127: Reboot On The Web Interface

    IT88 Series Administrator Guide 26.1.2. Reboot on the Web Interface If you want to restart the device system, you can operate it on the device web Upgrade > Basic interface as well. Moreover, you can set up a schedule for the device to be restarted.
  • Page 128: Reset On The Web Interface

    IT88 Series Administrator Guide If you only want to reset the configuration file to the factory setting instead of the whole device system, you can press Reset Config To Factory Setting tab. 26.2.2. Reset on the Web Interface AKUVOX SMART INTERCOM www.akuvox.com...
  • Page 129 IT88 Series Administrator Guide Device system can also be reset on device web Upgrade > Basic interface without approaching the device. If you only want to reset the configuration file to the factory setting, you can click Reset Config on the same page.
  • Page 130: Abbreviations

    IT88 Series Administrator Guide 27. Abbreviations ACS: Auto Configuration Server Auto: Automatically AEC: Configurable Acoustic and Line Echo Cancelers ACD: Automatic Call Distribution Autop: Automatical Provisioning AES: Advanced Encryption Standard BLF: Busy Lamp Field COM: Common CPE: Customer Premise Equipment...
  • Page 131 IT88 Series Administrator Guide PCMA: Pulse Code Modulation A-Law PCMU: Pulse Code Modulation µ-Law PCAP: Packet Capture PNP: Plug and Play RFID: Radio Frequency Identification RTP: Real-time Transport Protocol RTSP: Real Time Streaming Protocol MPEG: Moving Picture Experts Group MWI: Message Waiting Indicator...
  • Page 132: Faq

    A1: You can use the display screen to get the IP information, just check the IP address at Settings > Basic Info. You can also use Akuvox IP Scanner to search Akuvox devices in the same LAN network. Q2: Do Akuvox devices support Opus codec? A2: For now, only Akuvox Android video IP phone R48G can support Opus audio codec.
  • Page 133 Q7:Can I communicate other indoor monitors with indoor monitor? A7:Akuvox devices can communicate with each other, no matter whether it is indoor monitor, door phone or IP phone. Of course, indoor monitor can call other indoor monitors, also if you want, you can set other indoor monitors as auto answer mode.
  • Page 134: Contact Us

    IT88 Series Administrator Guide 29. Contact Us For more information about the product, please visit us atwww.akuvox.com or feel free to contact us by Sales email: sales@akuvox.com Technical support email: support@akuvox.com Telephone: +86-592-2133061 ext.7694/8162 We highly appreciate your feedback about our products.

This manual is also suitable for:

It88sIt88a

Table of Contents