Advertisement
For installation instructions or information about their corresponding
"readme", click the "Read Me" button in the autorun screen. The
autorun screen normally appears after the CD is inserted into a
CD-ROM drive.
2.5.4 LAN ADMtek 983B Drivers (AZ30-EL only)
The onboard LAN drivers does not support "Autorun". Once the
system has detected the ADMtek fast ethernet controller, it will
prompt you to install the driver for the operating system you are
using. The drivers are in the "LAN" root directory of the CD.
2.5.5 VIA KM266 Graphics Drivers
1. Insert the CD that came with the mainboard package into a
CD-ROM drive. The autorun screen (Main Board Utility CD) will
appear.
2. Click "VIA KM266 Graphics Drivers".
3. Follow the prompts on the screen to complete installation.
4. Restart the system.
For installation instructions or information, click the "Read Me" button
in the autorun screen. The autorun screen normally appears after the
CD is inserted into a CD-ROM drive.
2.5.6 Microsoft DirectX 8.1 Driver
1. Insert the CD that came with the mainboard package into a
CD-ROM drive. The autorun screen (Main Board Utility CD) will
appear.
2. Click "Microsoft DirectX 8.1 Driver".
3. Click "Yes" to continue.
4. Follow the prompts on the screen to complete installation.
5. Restart the system.
2
English
41
Advertisement
Chapters
