Lexmark MX6500 Quick Reference page 24

9
Close the multipurpose feeder door and the front cover.
10 From the scanner control panel, touch Done to clear the message
and continue printing.
[x]‑page jam, open upper rear door. [202]
CAUTION—HOT SURFACE: The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
1
Pull down the rear door.
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
3 Close the rear door.
24
4
From the scanner control panel, touch Done to clear the message
and continue printing.
[x]‑page jam, open upper and lower rear
door. [231–234]
CAUTION—HOT SURFACE: The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
1
Pull down the rear door.
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.