11 Handing Over To The End User - Glow-worm Compact 24c-AS/1 Installation And Maintenance Instructions Manual

10.1.4 Setting the heating and domestic hot water
temperature
Condition: If installing a control is not intended
▶
Set the desired heating flow and domestic hot water tem-
perature on the product (→ Operating instructions for the
product).
Condition: If installing a control is intended
▶
Set the heating flow and domestic hot water temperature
on the product to the relevant maximum value (→ Operat-
ing instructions for the product).
▶
Connect the control to the product. (→ Page 25)
▶
Set the desired heating flow and domestic hot water tem-
perature on the control (→ Operating instructions for the
control).
10.1.5 Domestic hot water
10.1.5.1 Descaling the water
Scale deposition increases as the water temperature in-
creases.
▶
Descale the water as required.

11 Handing over to the end user

▶
At the time of commissioning complete all relevant sec-
tions of the Benchmark commissioning checklist, located
at the rear of this document.
▶
For IE: Complete a "Declaration of Conformity" to indicate
compliance to I.S. 813. An example of this is given in the
current edition of I.S. 813.
▶
When you have finished the installation, affix the en-
closed sticker (which requests that the user reads the
instructions) to the front of the product in the end user's
language.
▶
Draw attention, to the current issue of the Gas Safety
(Installation and Use) Regulations, Section 35, which
imposes a duty of care on all persons who let out any
property containing a gas appliance in the UK.
▶
Explain to the end user how the safety devices work and
where they are located.
▶
Inform the end user how to handle the product.
▶
In particular, draw attention to the safety warnings that
the end user must follow.
▶
Inform the end user that they must have the product
maintained in accordance with the specified intervals.
▶
Pass all of the instructions and documentation for the
product to the end user for safe-keeping.
▶
Inform the end user about measures taken to ensure
the supply of combustion air and flue gas guiding, and
instruct the operator that he must not make any changes.
▶
Inform the end user that they must not store or use explo-
sive or highly flammable substances (such as petrol, pa-
per or paint) in the installation room of the product.
▶
Complete and sign off the Benchmark commissioning
checklist.
▶
Complete and sign off the guarantee documentation.
34
Installation and maintenance instructions Compact 0020313973_01