Canon BJC-2100 Series User Manual page 58

• From the bottom edge, roll the two sheets together with the plain paper
facing out and glossy side of the Magnet Sheet facing inside.
1.5"
• Once rolled, hold in this position for 20 seconds.
1.5"
• Unroll the media and place it in the sheet feeder immediately.
• Make sure the print (glossy) side of the Magnet Sheet is facing up when you
insert it into the sheet feeder.
• Load one Magnet Sheet at a time in the sheet feeder.
• Set the paper thickness lever to the right.
Printing on Special Media Types
Paper Handling 58