Canon BJC-2100 Series User Manual page 303

Scanning Images With Application Software
This section explains how to start IS Scan from a TWAIN image editing application software
so that you can scan images.
I Selecting a TWAIN-compatible Device
Before you scan images with application software, you must first select a TWAIN-
compatible device using the BJC-2100 driver. The basic procedure is described below
(steps may vary based on your application software).
1
Start the application software and then select New... from the File menu.
Then, open the menu you use to scan images. Install the scanner
cartridge in the printer.
2
To open the dialog box for selecting a TWAIN-compatible input device, you
normally select Import and then select TWAIN Select... from the File
menu. The "Select a source" dialog box is displayed.
Using the Scanner With Macintosh 303