Adjusting The Flash Output - Canon PowerShot G1 X User Manual

D: Manual
•
• Calculation of standard exposure is based on the specified metering method
(p. 94).
You can customize camera operation so that turning the 7 dial changes shutter
•
speed and turning the z dial changes the aperture value (p. 129).

Adjusting the Flash Output

Choose from the three flash levels in D mode.
You can also set the flash level by choosing X in the FUNC. menu (p. 40), or
•
by accessing n (p. 41) and choosing [Flash Output] in [Flash Control] on
the 4 tab.
You can set the flash level in M or B mode by accessing n (p. 41),
•
choosing [Flash Control] on the 4 tab, and then setting [Flash Mode] to
[Manual].
You can also access the [Built-in Flash Settings] n screen as follows
•
(except when an external flash (sold separately) is attached to the camera).
Press and hold the r button for at least one second.
-
When the flash is up, press the r button and immediately press the n
-
button.
Specific Shutter Speeds and Aperture Values (M Mode)
Enter D mode.
Set the mode dial to D.
Configure the setting.
Raise the flash, press the r button and
immediately turn the z dial to choose the
flash output level, then press the m button.
Once the setting is complete, X is displayed.
127